VSH Press - Pinhol
VSH Press - Pinhol
VSH Press - Pinhol
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
• Suitable for dimensions from DN20 to DN32 (22-35 mm)<br />
• EFP is mains operated, AFP battery operated<br />
• The mechanical retaining bolt securing device guarantees that the press jaw is firmly in place<br />
at all times<br />
• Due to its slender dimensions, this robust device, which is suitable for construction site use,<br />
makes even narrow press areas readily accessible<br />
• A powerful motor enables extremely short press times irrespective of the nominal widths and<br />
guarantees fast and economical working procedures<br />
Novopress ECO 301 DN20-50 (22-54 mm)<br />
Power supply<br />
Power<br />
Piston force<br />
Piston stroke<br />
Dimensions L x W x H<br />
Weight<br />
220 - 240 V / 50 Hz<br />
560 W<br />
45 kN<br />
45 mm<br />
420 x 85 x 110 mm<br />
5,0 kg<br />
12<br />
• Compact dimensions, suitable for dimensions from DN20 to DN50 (22-54 mm)<br />
• ECO 301 is mains operated<br />
• Control and monitoring of the entire press cycle is carried out by a microprocessor which<br />
ensures optimum press performance at all times over the entire period of use<br />
• The simple operation and ergonomic design render even narrow press areas readily accessible<br />
• The electronic retaining bolt securing device and automatic return after completion of the press<br />
cycle are tried and tested standards<br />
• Fast and economical. Short press cycles of approx. 12 seconds irrespective of the nominal widths<br />
Novopress ACO401 DN65-100 (76,1-108 mm)<br />
Power supply<br />
Power<br />
Piston force<br />
Piston stroke<br />
Dimensions L x W x H<br />
Weight<br />
18 V / 3,0 Ah<br />
400 W<br />
100 kN<br />
60 mm<br />
660 x 100 x 250 mm<br />
13,0 kg<br />
The ACO401 pressmachine is a perfect solution for fire sprinkler systems, potable water, ship building<br />
and industrial purposes. The dimensions DN65 upto DN100 (76,1-108 mm) can be pressed in a<br />
safe and reliable way by using the special HP401 slings.<br />
• Control and monitoring of the entire press cycle is carried out by a microprocessor which ensures<br />
optimum press performance at all times over the entire period of use<br />
• The simple hand operation of the machine allows the installer work at locations that are difficult<br />
to access (e.g. ceilings)<br />
• Automatic processing including the return after completion of the press cycle is a proven standard<br />
• <strong>Press</strong> cycles of ca. 25 seconds, independent of nominal diameter enable fast and economical<br />
performance<br />
• The cylinder including sling adaptor can be turned 180° and enables installation at difficult access<br />
locations
Change language