VSH Press - Pinhol
VSH Press - Pinhol
VSH Press - Pinhol
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
5<br />
The sizes refer to the general installation geometries and are shown schematically<br />
in illustrations 15, 16 and 17.<br />
a<br />
d a<br />
b<br />
c<br />
b<br />
Figure 15 Figure 16 Figure 17<br />
Figure 15 Figure 16 Figure 17<br />
DN<br />
20<br />
External ø (mm)<br />
22<br />
a<br />
65<br />
b<br />
25<br />
a<br />
80<br />
b<br />
31<br />
c<br />
35<br />
d<br />
150<br />
Tube depth (mm)<br />
40<br />
25 28 75 25 80 31 35 150 60<br />
32 35* 115 75 115 75 75 265 70<br />
40 42* 120 75 115 75 75 265 70<br />
50 54* 200 85 120 85 85 290 70<br />
65 76,1* 250 170 200 170 190 390 80<br />
80 88,9* 250 170 250 170 210 460 90<br />
100 108* 250 170 250 170 210 460 100<br />
23<br />
Table 17: Space needed for installation (* press slings)<br />
5.8 Bending<br />
Depending on the system, it may be necessary to bend the tube during installation. For this, commercially<br />
available manual, hydraulic or electric bending tools with the corresponding bending<br />
segments are used. The suitability of the bending tool is defined by the manufacturer. <strong>VSH</strong> <strong>Press</strong><br />
Sprinkler tubes for sprinkler installations are cold pliable in the sizes 22 and 28 mm.<br />
The minimum bending radius is as follows:<br />
Carbon and stainless steel tube<br />
<strong>VSH</strong> <strong>Press</strong> flexible hoses<br />
Rmin = 3,5 x d (max. 28 mm)<br />
22 mm = 70 mm<br />
28 mm = 85 mm<br />
Due to the danger of corrosion the tube must not be bent when it is warm<br />
Providing suitable solutions