VSH Press - Pinhol

3 VSH Press Sprinkler: a complete system
When looking at more traditional connection methods, the products used in sprinkler installations
are often approved as a product only. The VSH Press Sprinkler range is a complete system,
where the combination of tube, fitting and tools are combined into a certified sprinkler system.
The components of which our VSH Press Sprinkler system consist are:
• VSH Press Sprinkler fittings either in carbon or stainless steel in the dimensions 22-108 mm
• VSH Press Sprinkler tubes, which can be Sendzimir tube in combination with our carbon steel
fittings, but also 3 different grades of stainless steel for our stainless steel fittings, depending
on relevant approvals
• VSH Press Sprinkler press tools, either battery or mains operated
• Accessories such as our flexible hoses, especially adapted for an optimal combination
with our VSH Press Sprinkler fittings and installation tools
8
3.1 VSH Press Sprinkler fittings
The connection between the tube and the fitting is created by pressure using a press tool.
The fitting sleeve is deformed and adapts to the surface of the tube, which is then pressed in
turn against the sealing rings on the surface of the fitting. This process ensures the sealing
effect and prevents the tube from slipping out. VSH Press fittings are produced and compatible
with the so-called “M” pressing contour.
before pressing
Figure 7: Pressing before and after
after pressing
You can recognize the VSH Press Sprinkler range by the laser marking on the fitting which makes
it easy for you to identify the fitting used. Information such as material, approvals and dimensions
are all durably marked onto the fitting.
VSH Press Sprinkler Galvanized fitting
Laser marking
Press
Galvanized
Approvals
Dimension
Packaging Label
Type C.....
Dimension
Description: ...C-Pr
EAN Nr.
Art. Nr. VSH
Approvals
Number of pieces
Table 1: Identification marking for carbon steel VSH Press fittings