VSH Press - Pinhol
VSH Press - Pinhol
VSH Press - Pinhol
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
2.2 Advantages of <strong>VSH</strong> <strong>Press</strong> Sprinkler<br />
In the building installation market the advantages of press systems over traditional solutions such<br />
as threading, soldering and welding have long been recognized. The same advantages apply for<br />
<strong>VSH</strong> <strong>Press</strong> in sprinkler installations:<br />
• Performance guaranteed<br />
• Reliable<br />
• Easy & clean<br />
• Safe<br />
• Speed<br />
Apart from these advantages, the aesthetics of a <strong>VSH</strong> <strong>Press</strong> installation (compared to e.g. black<br />
steel) are often a reason for architects and designers to prescribe our system for in-sight/exposed<br />
installations.<br />
6<br />
2.2.1 Performance guaranteed<br />
With all fittings being manufactured in our<br />
state-of-the-art factory in the Netherlands,<br />
<strong>VSH</strong> guarantees consistent quality and<br />
supply. High-tech manufacturing, using laser<br />
welding technology, ensures that all welded<br />
fittings are tested 100%. This leak test is<br />
entirely integrated and automated in the laser<br />
welding process. All straight connectors with<br />
a threaded end and reducers are made out<br />
of one piece, meaning no risk of leakage and<br />
short build-in dimensions.<br />
Figure 5: State-of-the-art production<br />
Performance in flow is obvious, with the extremely smooth surface of tubes and fittings, flow rates<br />
are much better than those in traditional solutions. The performance of our fittings can also be<br />
measured by the various number of national and international approvals. With certificates for<br />
drinking water, in house gas installations and now also sprinkler there is a wide range available of<br />
system and product approvals.<br />
2.2.2 Reliable<br />
In <strong>VSH</strong> <strong>Press</strong> Sprinkler systems, the quality<br />
of the connection is mainly determined by the tool and<br />
not the operator, therefore reducing the risk of<br />
installation mistakes. All fittings in the dimensions<br />
DN20-DN50 (22-54mm) are equipped with Leak Before<br />
<strong>Press</strong>ed (LBP) O-rings, to reduce this risk<br />
even further. This LBP function ensures that fittings,<br />
which have not been pressed, will leak during the initial<br />
pressure test. The installer can immediately see which<br />
fitting he forgot to press and correct this. Once pressed,<br />
the system is guaranteed water and air tight.<br />
Figure 6: Leak Before <strong>Press</strong>ed