5 Technical data and installation instructions 5.1 O-ring The <strong>VSH</strong> <strong>Press</strong> Sprinkler fittings are supplied with an EPDM Leak Before <strong>Press</strong>ed O-ring in the dimensions DN20-DN50 (22-54 mm) with the following data: Technical data of the <strong>VSH</strong> <strong>Press</strong> LBP EPDM O-ring Material EPDM Colour black Coating Silicone-free Min./max. temperature (ºC) -35ºC up to +135ºC Max. short-term operating temperature (ºC) 150ºC Max. operating pressure (bar) 16 bar Fields of operation Wet and dry tube sprinkler systems Table 9: Dimensions and technical data for the <strong>VSH</strong> <strong>Press</strong> LBP EPDM O-ring 18 For the dimensions DN65-DN100 (76,1-108mm) all fittings are supplied with a standard EPDM O-ring: Technical data of the <strong>VSH</strong> <strong>Press</strong> EPDM O-ring Material EPDM Colour black Coating Silicone-free Min./max. temperature (ºC) -20ºC until +85ºC Max. short-term operating temperature (ºC) 120ºC Max. operating pressure (bar) 16 bar Fields of operation Wet and dry tube sprinkler systems Table 10: Technical data <strong>VSH</strong> <strong>Press</strong> EPDM O-ring 5.2 <strong>VSH</strong> <strong>Press</strong> Sprinkler Tube 5.2.1 Dimensions Dimensions of <strong>VSH</strong> <strong>Press</strong> Sprinkler Galvanized tube DN Nominal width (mm) Wall thickness (mm) Wall thickness tolerance (mm) 20 22 1,5 ± 0,15 25 28 1,5 ± 0,15 32 35 1,5 ± 0,15 40 42 1,5 ± 0,15 50 54 1,5 ± 0,15 65 76,1 2,0 ± 0,20 80 88,9 2,0 ± 0,20 100 108 2,0 ± 0,20 Table 11: Dimensions of <strong>VSH</strong> <strong>Press</strong> Sprinkler Galvanized tube Dimensions of <strong>VSH</strong> <strong>Press</strong> Sprinkler Stainless tube DN Nominal width (mm) Wall thickness (mm) Wall thickness tolerance (mm) 20 22 1,2 ± 0,10 25 28 1,2 ± 0,10 32 35 1,5 ± 0,10 40 42 1,5 ± 0,10 50 54 1,5 ± 0,10 65 76,1 2,0 ± 0,15 80 88,9 2,0 ± 0,15 100 108 2,0 ± 0,15 Table 12: Dimensions of <strong>VSH</strong> <strong>Press</strong> Sprinkler Stainless tube
5.2.2 Material specifications Material specifications of <strong>VSH</strong> <strong>Press</strong> Sprinkler Galvanized tube Material Unalloyed ULC (’Ultra Light Carbon’) C-steel, E190 part no. 1.0031 according EN 10305-3 Specifications EN10305-3 Approvals VdS, FM, FG, CNBOP, SBSC Type of tubing HF welded Welding deterioration reduction 100% EDDY CURRENT tested according to SEP 1925 Weld slag removal Outside weld flat, insight raising max. 0,5 mm, for dimensions >54 mm 0,8 mm Tolerances According to EN10305-3 Finishing Zinc coating of at least 20μm according steel grade ZNT275. The tube welding seam is subsequently galvanized on the outside. Surface finish Silver-coloured Marking <strong>VSH</strong> <strong>Press</strong> Sprinkler Galvanized, DN/size x wall thickness mm, VdS, G4080007, 16.0 bar, batch number + production date Smallest bending radius 3,5 x external diameter of the tube (max. 28 mm) Supply mode Tubes, length of 6 m +0/-50 mm, with protective caps Heat expansion coefficient 0,0108 mm/m with ∆T= 1K Max. operating pressure 16 bar Table 13: Technical data of the <strong>VSH</strong> <strong>Press</strong> Sprinkler Galvanized tube Material specifications of <strong>VSH</strong> <strong>Press</strong> Sprinkler Stainless tube 1.4401 1.4521 1.4520 Material X5CrNiMo 17 12 2 Material no. 1.4401 according to DIN-EN 10088-2 X2CrMoTi 18 2 Material no. 1.4521 according to DIN-EN 10088-2 X2CrTi17 Material no. 1.4520 according to DIN-EN 10088-2 Specifications EN 10312 – DVGW worksheet GW541 (2004) EN 10312 – DVGW worksheet GW541 EN 10296-2 Row 2 (2004) Table 2 Approvals DVGW, SVGW, ETA, ÖVGW, BYGGFORSK, DVGW, SVGW, ETA, FM, ÖVGW, FG FM, FG STF, PZH, SITAC, CSTBat, WRAS, VdS, FM, FG, CNBOP, SBSC Type of tubing TIG or laser welded Laser welded Laser welded Welding deterioration reduction 100% EDDY CURRENT tested according to SEP 1914/ EN 10246-2 100% EDDY CURRENT tested according to SEP 1914/ EN 10246-2 100% EDDY CURRENT tested according to SEP 1914/ EN 10246- 2 Weld slag Outside Outside Outside removal Tolerances According to EN 10312 According to EN 10312 According to EN 10296-2 Finishing Annealed under a protective atmosphere W2R Annealed under a protective atmosphere W2R Annealed under a protective atmosphere W2R Surface finish Matt silver-coloured Matt silver-coloured Matt silver-coloured Marking Smallest bending radius Supply mode Heat expansion coefficient Max. operating pressure <strong>VSH</strong> X PRESS DN/size x wall thickness mm Edelstahl/Stainless steel - Sanitär/Sanitary - GAS 1.4401 W2R, EN10217-7 EN10312 DVGW GW541 Reg.nr. DW-7301BM5610 SVGW ÖVGW W1.397 WRAS ETA BYGGFORSK STF PZH SITAC(+symbol) 0168/04 CSTBat(symbol) 14/04-88, VdS G4080037 16.0 bar, Production date/ Production code 3,5 x external diameter of the tube (max. 28 mm) Tubes, length of 6 m +0/-50 mm, with protective caps <strong>VSH</strong> X <strong>Press</strong> DN/size x wall thickness mm Edelstahl/Stainless steel, 1.4521, Sanitär/Sanitary - W2R EN10296-2 EN10312DVGW GW541 reg. nr. DW- 7301BP5610 SVGW ÖVGW ETA Production date/Production code <strong>VSH</strong> X <strong>Press</strong> DN/size x wall thickness mm Edelstahl/ Stainless steel, 1.4520 Heizung/Druckluft - Chauffage/Air Comprimé - Heating/Compressed Air Production date/Production code 3,5 x external diameter of the tube (max. 28 mm) 3,5 x external diameter of the tube (max. 28 mm) Tubes, length of 6 m +0/-50 mm, with Tubes, length of 6 m +0/-50 mm, protective caps with protective caps 0,0160 mm/m with ∆T= 1K 0,0104 mm/m with ∆T= 1K 0,0104 mm/m with ∆T= 1K 16 bar 16 bar 16 bar 19 Table 14: Technical data of the <strong>VSH</strong> <strong>Press</strong> Sprinkler Stainless tube (1.4401/1.4520/1.4521) 5.3 Threaded couplings The <strong>VSH</strong> <strong>Press</strong> Sprinkler product range also comprises articles with internal and external thread for connection with other threaded parts of a tube network (for example sprinklers, valves, mountings). Internal and external threads are produced in accordance with DIN 2999/ISO 7/1. Providing suitable solutions