FS-C8026N Service Manual - kyocera

2BF-5
1-3-6 Installing the dehumidifier heater (optional)
Dehumidifier heater installation requires the following parts:
• Dehumidifier heater (P/N 2BG28740): for 120 V specifications
• Dehumidifier heater (P/N 2BG28750): for 220 - 240 V specifications
• Two binding screws [bind tap tight-S M3 × 6 trivalent chromate] (P/N B1A53060A)
1. Remove the cassette or optional duplex
unit*.
*Duplex unit is standard equipment for 120
V (U.S.A.) specifications.
2. Remove the paper feed unit [transfer unit]
(See page 1-6-12).
3. Remove the rear cover (See page 1-6-5).
4. Attach the dehumidifier heater by using the
two screws.
5. Insert the connector of the dehumidifier
heater to square hole.
6. Connect the connector and connector for
power supply.
Connector
for power
supply
Connector
Connector
Square
hole
Screws
Connector for
dehumidifier heater
Figure 1-3-20
1-3-14