FS-C8026N Service Manual - kyocera

2BF-5
Service items
>>Maintenance
[A]
Counter reset for the maintenance kit A
Description
Description
The "Install MK [A]" message means that maintenance kit A should be replaced at every
300,000 images of printing. The interval counter must be reset using this service item.
MK-810A Maintenance kit A includes the following units:
• TR-810 transfer unit
• FK-810 fuser unit
• Ozone filter
Purpose
To reset the life counter for the transfer unit and fuser unit in maintenance kit A.
Procedure
1.Replace the transfer unit (See page 1-6-12).
2.Replace the fuser unit (See page 1-6-17).
3.Replace the ozone filter (See page 1-6-40).
Start
Enter the service mode (>>Maintenance [A]).
Press the ENTER key twice. The counter for each component is reset immediately.
Completion
Note:
Occurrences of resetting the maintenance kits are recorded on the service status page in
number of pages or images at which the maintenance kit was replaced (See page 1-4-2).
>>Maintenance
[B]
Counter reset for the maintenance kit B
Description
The "Install MK [B]" message means that maintenance kit B should be replaced at every
300,000 images of printing. The interval counter must be reset using this service item.
MK-810B Maintenance kit B includes the following units:
• DV-810K black drum unit
• DK-810 black developer
Purpose
To reset the life counter for the black drum unit and developer in maintenance kit B.
Procedure
1.Replace the black drum unit (See page 1-6-15).
2.Replace the black developer (See page 1-6-15).
Start
Enter the service mode (>>Maintenance [B]).
Press the ENTER key twice. The counter for each component is reset immediately.
Completion
Note:
Occurrences of resetting the maintenance kits are recorded on the service status page in
number of pages or images at which the maintenance kit was replaced (See page 1-4-2).
1-4-10