SecureStream IP Receiver - Security Help Desk

Working with the Application Status tab
The Application Status tab in the configuration editor, gives an overview of the status of
SecureStream IP. No details can be entered or edited here.
Figure 14: Jetapp configuration editor, Application Status tab
Table 5 describes the Application Status tab data.
Table 5: Application Status tab data
Field
Registered Session Count
Total Sessions
Total Main
Total Backup
Total Disaster
Total Unlicensed
Total Offline
Last Restart
Busiest Session
CS I/O port
CS Status
CS Output High Water
Mark
TITAN I/O port
Monitoring Computer
Application licensing
SecureStream’s local IP
Addresses
Function
The total number of licensed Challenger sessions available.
Total number of Challenger sessions in use.
The total number of panels in the database that consider this
SecureStream IP Receiver to be designated as ‘main’.
Total number of panels in the database that consider this
SecureStream IP Receiver to be designated as ‘backup’.
Total number of panels in the database that consider this
SecureStream IP Receiver to be designated as ‘disaster’.
The total number of unlicensed panels in the database.
Total number of panels listed as ‘Offline’.
Date and time of last SecureStream IP Receiver restart.
IP address of the Challenger panel that created the most event traffic
over the most recent ten-minute accounting period.
Central Station (Computer) port status (Open/Not Open).
Central Station link status (On/Off line)
The quantity of Challenger panels waiting to remove message(s) from
their buffers. Messages cannot be removed until the monitoring
computer acknowledges its currently outstanding message.
Port status. Open or closed.
Monitoring station link status. Online or offline.
Licensed, unlicensed or number of days left of the 30-day grace
period.
IP address of this SecureStream IP Receiver.
24 SecureStream IP Receiver Installation & Programming Guide 2.0