SecureStream IP Receiver - Security Help Desk

Stage
Description
3 Then, one of the following occurs:
a) If the encryption set at the panel matches the encryption set at SecureStream
IP, and SecureStream IP can read the events, the panel’s computer address
(Challenger Installer menu 9) and other parameters, are read and stored in the
database. SecureStream IP sends acknowledgements to the panel for all
events received.
b) If no encryption is set, and SecureStream IP can read the events, the panel’s
computer address (Challenger Installer menu 9) and other parameters are read
and stored in the database. SecureStream IP sends acknowledgements to the
panel for all events received.
c) If SecureStream IP can’t read the events, e.g., when encryption key is incorrect,
the computer address of the new record is set to ‘0000’ and an error message
is displayed in SecureStream IP when that Challenger’s record is edited. This
message displays:
4 If SecureStream IP has successfully read the initial events from Challenger (as in points
a or b), SecureStream IP immediately forwards CID events to the alarm monitoring
station.
Panel Editor
The panel editor allows you to configure individual Challenger panels. SecureStream IP is designed to
auto-enrol many of the details when a correctly-configured panel is added to the system.
SecureStream IP can send or receive data (upload or download data), depending on the presence or
absence of management software. The options for uploading and downloading data are described in
the following pages.
26 SecureStream IP Receiver Installation & Programming Guide 2.0