SecureStream IP Receiver - Security Help Desk

How to create a qualification
Trained Installation Technicians or Site Managers may create a qualification.
Step
Instructions
1 Click the Resources navigation icon (see Table 1 on page 8).
2 Click the Qualifications folder in the data tree to display existing qualifications.
3 Click Add New to display a new Details tab. See Figure 24 on page 39 for the location of
the Add New button.
Type the details for the following fields:
• Tag – A single word describing this qualification. For example, type ‘trainee’ for a
Trainee Operator.
• Short Description – Brief description of the qualification, for example ‘Trainee
Operator’.
• General Comments – Any comments describing this qualification or the way in
which it is applied.
4 Click the Save icon to save the new parcel (e.g. ‘trainee’).
Refer to the following sections for detailed descriptions of enabling and disabling specific Feature
elements.
How to edit an existing qualification and its features
Editing an existing qualification
Changes made to an existing qualification affect all operators currently using that qualification. For
example, if the administrator decides to give an individual operator a set of features different from
the other operators, they will need to create a new qualification for that operator.
Selecting and deselecting features and feature sub-elements can make operator access highly
specific.
NOTE: Altering an existing qualification changes access rights for all other operators sharing the
same qualification.
Figure 25: Selecting features for a qualification
40 SecureStream IP Receiver Installation & Programming Guide 2.0