SecureStream IP Receiver - Security Help Desk
SecureStream IP Receiver - Security Help Desk
SecureStream IP Receiver - Security Help Desk
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
How to change an operator password<br />
This section describes how to change an operator’s password in <strong>SecureStream</strong> <strong>IP</strong>.<br />
Use the following procedure to change an operator’s password.<br />
Step<br />
Instructions<br />
1 Find the operator record. See Search for an existing operator on page 42.<br />
2 Double-click the operator’s record to open it.<br />
3 Click the Codes folder in the data tree and the vcode parcel will display with the operators<br />
password information on the right.<br />
4 Enter the operator’s password into the left password field and then retype the password<br />
in the right field. If the two passwords do not match the Reset button displays in orange.<br />
The Reset button resets the operator’s password to the general default password for all<br />
operators i.e., ‘4346’.<br />
5 To show the characters in the password click Uncloak.<br />
6 Press the Save icon to save the new password.<br />
44 <strong>SecureStream</strong> <strong>IP</strong> <strong>Receiver</strong> Installation & Programming Guide 2.0
Change language