we keep things moving - STÖBER ANTRIEBSTECHNIK GmbH + Co ...

Mounting
Operation manual
3
3 Mounting
The DP 5000 fieldbus module (PROFIBUS DP-V1) must first be installed before
the inverter of the 5 th generation of STÖBER inverters can be integrated in a
PROFIBUS system. The accessories are installed above the inverter display.
We recommend ordering the option card with mounting and the inverter. If this is
done, STÖBER ANTRIEBSTECHNIK will mount the DP 5000 before delivery.
3.1 Install in MDS 5000 or SDS 5000
WARNING!
Danger of injury/death and property damage due to electric shock!
Before installing accessories, turn off all voltage supplies! Then wait 5
minutes for the DC link capacitors to discharge. Never begin with accessory
installation until after this!
CAUTION!
Danger of property damage due to electrostatic discharge, among others!
Provide suitable protective measures while handling open PCBs (e.g., ESD
clothing, environment free of dirt and grease).
Do not touch the gold contact surfaces.
You will need the following tools to install the DP 5000:
• TX10 Torx screwdriver
• Pliers
• Hexagon socket wrench, 4.5 mm
Installing the DP 5000
1 Unscrew the mounting screws and remove the cover plate:
WE KEEP THINGS MOVING
ID 441687.03
10