AIS 650 Installation manual - Zanshin

More documents

Recommendations

Info

Note: A Multifunction display connected to the AIS transceiver cannot use the GPS which is connected to the GPS connection on AIS unit. Pack contents The AIS650 model contains the following items: 1 2 Status AIS650 Class B Transceiver USB PWR/Data ST ng GPS ANT VHF ANT 3 4 5 Item Description 1. AIS650 transceiver unit 2. GPS antenna (with 10 m coaxial cable) 3. 4 x Fixing screws 4. 2 x mounting studs 5. 2 x thumbs nuts 6. 2 m power/data cable 7. Document pack containing: • Installation instruction • Support software CDROM • Warranty registration card 8. SeaTalk ng Dust cap 9. 1 m SeaTalk ng spur cable Unpack the unit and GPS carefully to prevent damage. Save the carton and packing in case the unit has to be returned for service. 6 7 8 9 D12096-1 38 AIS350 / AIS650 Installation instructions
Tools required Tools required for installation 1 2 3 Item Description 1. Power Drill 2. Screwdriver 3. 3.2 mm (1/8”) drill bit D12087-1 3.6 Cables and connections General cabling guidance Cable types and length It is important to use cables of the appropriate type and length • Unless otherwise stated use only standard cables of the correct type, supplied by Raymarine. • Ensure that any non-Raymarine cables are of the correct quality and gauge. For example, longer power cable runs may require larger wire gauges to minimize voltage drop along the run. Routing cables Cables must be routed correctly, to maximize performance and prolong cable life. • Do NOT bend cables excessively. Wherever possible, ensure a minimum bend radius of 100 mm. Minimum bend 200 mm (8 in) diameter Minimum bend of cable 100 mm (4 in) radius • Protect all cables from physical damage and exposure to heat. Use trunking or conduit where possible. Do NOT run cables through bilges or doorways, or close to moving or hot objects. • Secure cables in place using tie-wraps or lacing twine. Coil any extra cable and tie it out of the way. • Where a cable passes through an exposed bulkhead or deckhead, use a suitable watertight feed-through. • Do NOT run cables near to engines or fluorescent lights. AIS650 Class B transceiver 39
Page 1: AIS 3 5 0 Re c e ive r / AIS 6 5 0
Page 5 and 6: Contents Chapter 1 Important inform
Page 7 and 8: Chapter 1: Important information Ap
Page 9 and 10: Product disposal Dispose of this pr
Page 11 and 12: Data Receiver (receive) Transceiver
Page 13 and 14: NMEA Connections You can connect yo
Page 15 and 16: Chapter 2: AIS350 Receiver Chapter
Page 17 and 18: Status USB AIS350 Receiver PWR/Data
Page 19 and 20: Item Description 1. Power Drill 2.
Page 21 and 22: 2.5 VHF connection Connect up your
Page 23 and 24: Note: The wire colors on your Multi
Page 25 and 26: PWR/Data STng VHF ANT Item Wire col
Page 27 and 28: Note: If you are fitting the AIS un
Page 29 and 30: Weight Connectors 280 grams • VHF
Page 31 and 32: Chapter 3: AIS650 Class B transceiv
Page 33 and 34: 3.3 Requirements for USA & Canada I
Page 35 and 36: Warning: Maximum Permissible Exposu
Page 37: Status USB PWR/Data ST ng GPS ANT V
Page 41 and 42: • Connecting AIS Silent wires •
Page 43 and 44: 3.10 Multifunction display connecti
Page 45 and 46: Item Wire color Signal / Descriptio
Page 47 and 48: USB PWR/Data ST ng GPS ANT VHF ANT
Page 49 and 50: • Received AIS messages • Own v
Page 51 and 52: Mounting Fitting the AIS unit Note:
Page 53 and 54: ii. If you want to route the antenn
Page 55 and 56: 3.18 Diagnostics 3.19 Troubleshooti
Page 57 and 58: Connectors Transceiver standard •
Page 59 and 60: Chapter 4: Technical support Chapte
Page 61 and 62: Chapter 5: Options and accessories
Page 63 and 64: 5.2 Spares and accessories The foll
Page 65 and 66: Owner notes:
Page 68: www.raymarine.com

AIS 650 Installation manual - Zanshin

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?