User Manual K1297-G20 Monitor Protocol Tester ... - TRS-RenTelco

Appendix A: Interfaces
S 0 Interface Module
The S 0 interface module provides three RJ45 connectors for line
connection, which are designated as follows:
“TE A” or “TE M” (old: “to NT”)
“MON A B” or “MON M N” (old: “S-BUS MON”)
“TE/NT B” or “TE/NT N” (old: “to TE(NT”)
Modes of Operation. To monitor lines with the S 0 interface module, proceed
as follows:
1. Deactivate the line and connect the S bus with connector “MON A B”/
“MON MN”.
2. Activate the line from the NT or TE.
CAUTION. Make sure to only use the “MON A B”/“MON M N” connector
when connecting the S bus.
K1297-G20 Monitor User Manual A-29