04.10.2014 Views

User Manual K1297-G20 Monitor Protocol Tester ... - TRS-RenTelco

User Manual K1297-G20 Monitor Protocol Tester ... - TRS-RenTelco

User Manual K1297-G20 Monitor Protocol Tester ... - TRS-RenTelco

SHOW MORE
SHOW LESS

You also want an ePaper? Increase the reach of your titles

YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.

Examples<br />

Recording and Reviewing <strong>Monitor</strong>ing Data<br />

The signalling data of the active data flow can be recorded in a special<br />

recording file for subsequent evaluation and/or offline analysis. This<br />

recording feature can be used in conjunction with or as an alternative to<br />

online monitoring.<br />

Preliminary Steps<br />

The <strong>Protocol</strong> <strong>Tester</strong> has been properly connected to the data line and<br />

turned on. The modules booted without errors and the application has<br />

been started.<br />

Once the autoconfiguration has terminated successfully, the Data<br />

Flow Window appears (refer to “Preliminary Steps” in the previous<br />

section). Make sure you are in the Measurement Scenarios pane.<br />

Start Recording<br />

The right side of the window Measurement Scenarios contains a<br />

pipeline branch with the processing element Recording File at the<br />

right end of the pipeline, which displays a file icon. NONE signifies that<br />

no recording file has been created.<br />

72 <strong>K1297</strong>-<strong>G20</strong> <strong>Monitor</strong> <strong>User</strong> <strong>Manual</strong>

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!