Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
<strong>TTP</strong>-<strong>245</strong> / <strong>TTP</strong>-<strong>343</strong><br />
3.11. Replacing Ribbon Motor and Ribbon Sensor<br />
1. Please refer to 3.1 for disassembling the top cover and top inner cover.<br />
2. Disconnect ribbon mechanism by removing 4 screws from the top inner<br />
cover.<br />
3. Remove 2 screws on the ribbon motor PCB.<br />
4. Replace the ribbon motor sensor.<br />
Screw<br />
s<br />
Ribbon<br />
Mechanism<br />
Screw<br />
s<br />
Screws<br />
Ribbon<br />
Motor<br />
Sensor<br />
5. Screw off 2 screws from the top inner cover.<br />
6. Replace the ribbon sensor.<br />
7. Reassemble parts in reverse procedures.<br />
55