You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
<strong>TTP</strong>-<strong>245</strong> / <strong>TTP</strong>-<strong>343</strong><br />
6. Pull up the front panel from the lower cover.<br />
7. Remove the 6 screws in lower inner cover.<br />
Screws<br />
Screws<br />
8. Lift up the lower inner cover from the Lower Cover.<br />
9. Install the 4 pin connector of the cutter onto JP10 on the main board. Pull the wire<br />
of the 4-pin connector through the slot of lower inner cover front side. Then, put<br />
back the lower inner cover.<br />
wire of the<br />
4-pin connector<br />
Location<br />
JP10<br />
65
Change language