Axiocam ERc 5s Operating Instructions - Carl Zeiss

Included with product
Included in standard package
• AxioCam ERc 5s camera with dust cap
• A to Mini B type USB cable
1 Camera
2 USB cable
In addition:
• DVD containing the configuration program and the AxioVision LE imaging
software (upgrade to full version available as an option)
• Operating instructions (this Infoflip)
i
Note:
A C-mount adapter for the transition between the camera and microscope is not
supplied! Order the adapter separately based on the required magnification and
the necessary adaptation to your microscope (also applies to microscopes from
third-party manufacturers). Carl Zeiss offers various camera adapter interfaces for
its own microscope lines. The smaller the numerical value printed on these different
adapters, the more of the image observed through the eyepiece is covered by the
camera ! image. In all cases the frame visible in the photo will be smaller than the
image observed through the eyepiece.
!
Included in stand-alone package (optional)
This package can be ordered as an option in addition to the standard package.
It is useful for situations when you want to operate the camera without a
connection to a PC. In this case the image data are saved to a memory card.
• Mains power supply with country-specific plug adapters
• IR remote control to trigger the camera remotely
• SDHC type memory card with a capacity of 4 GB, incl. protective case
• Card reader for this memory card
• HDMI to DVI video adapter to connect PC monitors or beamers
i
1 Power supply (with
country-specific
adapters)
2 Remote control
3 Memory card
4 Card reader
5 Video adapter
!
Caution!
Imaging errors due to damage caused in transit! In spite of the padded outer
packaging, it is possible that damage may be caused to the camera. Check that the
outer packaging or camera packaging does not appear to be damaged! Report any
obvious damage to the carrier and vendor.
!
Included with product