Manual Verification Tool IMP - Inheco

Appendix
EC - Declaration of Conformity
EC - Declaration of Conformity
in accordance with Directive 2006/95/EC, 93/68ECC and 2004/108/EC
Product:
INHECO Measurement Plate (IMP)
Part No: 7901000
Standards (Safety): IEC/EN 61010-1: 2001
CAN/CSA 22.2 No 61010-1: 2004
UL 61010-1:2004
IEC/EN 61010-2-101: 2002
CAN/CSA 22.2 No 61010-2-101: 2004
Standards (EMC):
EN55011:2007 +A2:2007
EN 60601-1-2:2007-12
EN 61000-3-2:2006
EN 61000-3-3:1995 +A1:2001 +A2:2005
EN 61000-4-1:2007
EN 61000-4-2:1995 +A1:1998 +A2:2001
EN 61000-4-3:2006 +A1:2008
EN 61000-4-4:2004
EN 61000-4-6:2007 + Corrigendum 2007-08
EN 61000-4-8:1993
EN 61000-4-11:2004
EN 61326-1:2006
IEC/CISPR 11:2003 +A1:2004, +A:2006
IEC 60601-1-2:2007 modified
IEC 61000-3-2:2005
IEC 61000-3-3:1994 +A1:2001 +A2:2005
IEC 61000-4-1:2006
IEC 61000-4-2:1995 +A1:1998 +A2:2000
IEC 61000-4-3:2006 +A1:2007
IEC 61000-4-4:2004
IEC 61000-4-6:2003 +A1:2004 +A2:2006
IEC 61000-4-8:1993 +A1:2000
IEC 61000-4-11:2004
IEC 61326-1:2005
This product complies with the essential requirements of the Low Voltage Directive 2006/95/EC and
EMC directive 2004/108/EC, when used for its intended purpose.
Manufacturer address: INHECO Industrial Heating and Cooling GmbH
Fraunhoferstr. 11
82152 Martinsried
Germany
Phone, Fax: Tel.: +49 (0) 89 899 593 -100
Fax: +49 (0) 89 899 593 -499
Martinsried, February 21th, 2011
Place and date of issue
Günter Tenzler, Managing Director
TD_C3_11-02-21_7901000 EC-Declaration of Conformity_02.docx
INHECO 50