HP Jetdirect ew2500 802.11g Wireless Print Server - Hewlett Packard

More documents

Recommendations

Info

4. For a new print server that has not been configured, select First time wireless printer installation and click Next. NOTE: By default, the wizard will install the printer on this PC. If you only want to configure wireless settings, uncheck the box next to Install the printer on this PC. If this box is checked (default), the wizard attempts to install the printer on this PC after wireless connection settings have been configured. If you later wish to install the printer on this PC, see Install the printer on a network system or server on page 23. 16 Chapter 3 Make a network connection ENWW
5. Select the configuration method. NOTE: HP recommends that you configure the wireless settings using a network cable (wired). Although you can configure without a network cable (wireless), it is generally easier to configure using the included network (LAN) cable. 6. Follow the instructions through the remaining screens to complete your wireless configuration. 7. When you have configured the HP Jetdirect print server with a wireless connection to your network, do the following: ● Print an HP Jetdirect configuration page to confirm your settings. ● To install the printer on your PC, continue with the instructions displayed. After your printer is configured with a network connection, it may be installed on your network computers or servers similar to other network printers. To install the printer, go to Install the printer on a network system or server on page 23. If you are unable to communicate with the printer over your network, see Troubleshooting on page 28. Configure settings for a wired network A network connection is required before you can discover and install the printer on your network systems. To configure a wired connection, verify the following: ● You have a computer with one of the following operating systems: ◦ Microsoft Windows XP, Vista, Server 2003, or Server 2008. ◦ Apple Mac OS X 10.2 or greater. ● You have installed the HP Jetdirect print server hardware and have printed an HP Jetdirect configuration page. ENWW Configure settings for a wired network 17
Page 1: Setup Guide HP Jetdirect ew2500 802
Page 4 and 5: © 2004-2009 Copyright Hewlett-Pack
Page 6 and 7: Optional wireless connection setup
Page 8 and 9: vi ENWW
Page 10 and 11: What you need to supply ● A suppo
Page 12 and 13: Wireless LAN terms and concepts Acc
Page 14 and 15: Encryption of available channels au
Page 16 and 17: Service Set Identifiers (SSID) Sign
Page 18 and 19: For release notes, see the Readme f
Page 20 and 21: 2. Connect the power cable. ● Plu
Page 22 and 23: To configure a wireless connection
Page 26 and 27: Set up each Windows computer for pr
Page 28 and 29: 5. For a new print server that has
Page 30 and 31: Optional methods to configure a wir
Page 32 and 33: Microsoft networks To install the p
Page 34 and 35: If the test page fails to print, pe
Page 36 and 37: 5 Troubleshooting This section prov
Page 38 and 39: Table 5-1 HP Jetdirect ew2500 802.1
Page 40 and 41: ◦ IP address ◦ BSSID (Basic Ser
Page 42 and 43: A Service and support ● Hewlett-P
Page 44 and 45: Service outside the USA Customers o
Page 46 and 47: ◦ HP embedded Web server, HTTP (T
Page 48 and 49: C Specifications ● Electrical (po
Page 50 and 51: Radio characteristics HP subassembl
Page 52 and 53: This device complies with Part 15 o
Page 54 and 55: Notice to users in Canada Notice to
Page 56: Notice to users in Taiwan 48 Append

HP Jetdirect ew2500 802.11g Wireless Print Server - Hewlett Packard

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?