2 - Weaver Leather

Horse Shoe Brand Tools
Shoe Hammer
Popular choice for saddlemakers,
luggage manufacturers and
other leatherworkers
Features a highly-polished, heattreated,
shock-resistant steel head
with fancy ornamentation.
Good for making sharp folds,
adhering cemented parts together
and tapping over hand stitching,
lacing and welts.
Quality hickory handle.
Has a 1-1/4" rounded face.
Overall length is 11-3/4".
67-5175. ...............
Tack Hammer
Top quality tack hammer features a
highly-polished, heat-treated, shockresistant
steel head
Head features beautiful ornamentation.
Great for forming leather and fine
tack in hard-to-reach areas.
Quality hickory handle.
Has a 6-1/4" head with 9/16" face
and 3/4" wide welt tail.
Overall length is 11-1/2".
67-5170. ...............
Tap Off Hammer
Invented by Jeremiah Watt, this hammer
features a broad, flat face that’s perfect
for striking the leather tap off
It does not create a cup in the tap-off
like a hammer with a domed face.
Head features attractive ornamentation.
Hefty enough to give you a good
impression when hitting a pattern.
There’s extra length in the nose of the
hammer so it will fit between the holding
fingers of your left hand.
Features a hickory handle.
Diameter of head is 1-1/2"; length of
head is 4-1/8".
Overall length is 11-1/2".
67-5172. ....................
Rivet Hammer
The weight in the head of this
hammer makes riveting a breeze
A necessity for any shop that
does a lot of riveting.
Head features beautiful
ornamentation.
Quality hickory handle.
Striking surface is 1/2" x 1/2";
length of head is 5".
Overall length is 11-1/4".
67-5171. ...............
French Shoe Hammer
A large, nearly flat face and a longer
neck and tail to help you reach into
small areas
Design helps you work while
preventing you from hitting
your knuckles.
Select hickory handle has been
double wedged and the head
has been double tempered.
Head features beautiful
ornamentation.
Diameter of head is 1-1/2";
length of head is 7".
Overall length is 11-1/2".
67-5176. ...............
Ball Peen Hammer
A popular design that is
comfortable to use
Great for pounding seams on
rawhide and a variety of other uses.
Head has attractive ornamentation.
Features a hickory handle.
Diameter of head is 1"; length of
head is 3-7/8".
Overall length is 11-1/4".
67-5177. ....................
SPEEDY SHIPPING!
Most catalog orders ship
out within 24 hours.
That’s Fast!
®
Cantle Pliers
Designed to grip deep
on the cantle binding
Great for forming leather, these pliers
are made from a high quality, heattreated
tool steel.
Jaw width is 1-1/8"; jaw depth is 2"
and there is a full 1/2" between jaws.
Overall length is 9-1/2".
67-5181. ......................
Horn Pliers
Jaws are smooth, leaving no
marks on the saddle horn as you work
Constructed of high quality, heat-treated
tool steel.
Jaw width is 3/4"; jaw depth is 1-5/8"
and there is a full 3/8" between jaws.
Overall length is 8-1/2".
67-5180. ......................
Satisfaction
Guaranteed
We are deeply committed
to the excellence of our work
and the quality of our service
and will go to great lengths to
keep you a happy, satisfied
customer. At Weaver, we're
not satisfied unless you are.
For this reason, Weaver
provides both a Warranty and
a Hassle Free Returns Policy.
®
®
228 www.leathersupply.com
®