2 - Weaver Leather

Master Tools Hand-Operated Strap Cutter
Perfect for smaller cutting projects, this hand-operated strap cutter will save
you a tremendous amount of time. It cuts practically any type of leather with
ease and will give all your straps, from belt blanks to strap goods, a uniform,
professional look. With the time you save on each project, this machine will
pay for itself in no time!
Designed and manufactured by Weaver Leather, this 8" strap cutter
features a table and roll that adjust together.
The handle on this hand-operated machine can be mounted in two
positions – one for higher torque, lower speed applications and one
for lower torque, higher speed applications.
Thoughtfully-designed for easy access and maintenance.
Designed with roller bearings to ensure trouble-free operation.
Machine can be portable or mounted to a workbench.
Ends remove easily for quick change of blades and spacers.
Features holes and mounting hardware for easy attachment to
your workbench.
This machine has the capability to cut 1/8" laces with the use
of the 1/16" spacers between the blades.
Comes set up for 1" straps with eight 1" spacers and eight blades.
Easily cuts through any kind of leather.
This efficient machine is an economical alternative to cutting by hand.
Replacement bottom roll and additional spacers and blades sold separately.
Blades feature an overall depth of 2.75" and an inside depth of 1.395".
Instruction sheet included.
Weighs approximately 145 lbs. including shipping crate.
65-3085 .............................................
65-3086 Replacement Plastic Bottom Roll ...................
65-3087 Spacers, 1/16", 1/4", 1/2", 5/8", 3/4" or 1"* ............
65-3088 Blades ........................................
65-3089 Replacement Fingers. ............................
*1/16" measures 1/16" even, the rest are 1/16" under size so you
get the proper measurement after the addition of the blades.
Master Tools Machinery & Equipment
Redesigned gears and fingers
for even better performance
Blades and spacers
change quickly and easily
by Weaver
We’re your belt manufacturing headquarters
with a large variety of shoulders and double
backs in a great selection of weights and
colors. See pages 28-31 for details.
Hand-operated
design is ideal for
smaller projects
Master Tools Power Edge Slicker
If you’re tired of the tedious task of smoothing edges by hand, try our Master
Tools Power Edge Slicker. This machine will smooth the edges on your strap
goods to that hand rubbed finish you desire in a fraction of the time spent
doing it by hand. Conveniently designed to be mounted on the edge of your
workbench, this machine has a 45 degree angled arm for the rolls so they
come out past your bench for easier use.
Gives a smooth finish on all sides of leather straps.
Motorized machine features a wooden roller, a sanding
roller, a belt guard, an on/off switch and a base that can
be mounted to a workbench.
The shaft is 3/4" wide with a 19" overall length.
Wooden roller is great for final touches and can be used dry.
Sanding roller is 4-1/2" wide and ideal for sanding applications.
The Cordura ® roller and the sanding sleeve are interchangeable.
Replacement rollers available.
65-6025 ................................................
65-6026 Replacement Cordura ® Roller. ..........................
65-6027 Replacement Wooden Roller ..........................
65-6030 Replacement Rubber Roll with Sanding Sleeve .............
65-6031 Replacement Sanding Sleeve ..........................
Mounts to the edge
of your bench for
easy access
by Weaver
Get that hand rubbed look
in a fraction of the time with
this power edge slicker
The Cordura ®
Roller and the
Sanding Sleeve are
Interchangeable
65-6026
Replacement Cordura ® Roller
65-6027
Replacement Wooden Roller
65-6030
Replacement Rubber Roll
with Sanding Sleeve
65-6031
Replacement Sanding Sleeve
Call Toll Free in the U.S. & Canada 800-932-8371 (800-WEAVER-1)
257