Participant Technical Reference Manual - IESO

More documents

Recommendations

Info

4. Operational Metering Equipment & AGC IMO_MAN_0024 Figure 4- 1 Block Diagram of Typical AGC Control Arrangement for Generation units With Remote MW Setpoint Control Capability 302 The information necessary to control the generation facility under the terms and conditions of the AGC contract will reside and operate in the EMS according to the existing control schemes. 303 It is the market participant’s responsibility to protect their equipment from damage due to erroneous pulses or spurious signals that may cause the equipment to operate beyond its designed parameters, regardless of how these signals were generated or transmitted. 304 Two models of RTU have been qualified for use by the IESO for AGC. These are GE models D20/200 and D25 RTUs. 76 Public Issue 21.1 – March 15, 2010 - estimated
Participant Technical Reference Manual 4. Operational Metering Equipment & AGC Issue 21.1 – March 15, 2010 - estimated Public 77
Page 1 and 2:
MANUAL PUBLIC IMO_MAN_0024 Market M
Page 3 and 4:
Participant Technical Reference Man
Page 5 and 6:
Page 7 and 8:
Page 9 and 10:
Page 11 and 12:
Page 13 and 14:
Page 15 and 16:
Page 17 and 18:
Page 19 and 20:
Page 21 and 22:
Page 23 and 24:
Page 25 and 26:
Page 27 and 28:
Page 29 and 30:
Page 31 and 32:
Page 33 and 34: Participant Technical Reference Man
Page 83: Participant Technical Reference Man
Page 99 and 100: Appendix B: List of Commonly Used A
show all

Participant Technical Reference Manual - IESO

Create successful ePaper yourself

Delete template?

Save as template?