Non destructive testing

Hand magnetizing tools
SERIE HANSA-230
UM15 UM5 UM9 UM10 UM8
UM 5 UM 8 UM 9 UM 10 UM 15 crossyoke
Art.-Nr. 131.002.018 131.002.020 131.002.024 131.002.026 131.002.028 131.016.100
Pol distance
(mm) 162 170 170 135 95 - 250 120 / 120
Pol magnetizing
area (mm) 27 x 25 25 x 25 25 x 25 25 x 25 25 x 25 25 x 25
Outer
dimensions
(mm) 235x145x47 265x163x50 250x130x46 210 x 110 255 x 173 235x180x320
Tangential
fieldstrength 32 40 35 35 21 32
A/cm (DIN
54131-2)
Connecting
cable (m) 3 3,5 3 3 3 5
Voltage V 230 230 230 230 230 230/42
Protection class IP 65 IP 65 IP 65 IP 65 IP 65 IP 54
Pull of strengtht 130 130 130 90 50 >300
9934-3; 2002
(N)
weight (kg) 3,0 3,3 2,9 2,2 3,2 9,2
Flaw Finder Type A
Art.-Nr. 131.001.010
TB 10 weight lifting test block
The TB 10 serves test for change-, direct
current and permanent magnet. The block
weight is marked on each block and is
provable by NIST.
Flaw Finder Type N
Art.-Nr. 131.001.022
Lifting power: >30kg, field strength:>15Oe (pole
distance 150mm)
Outer diameter: 32mm, hight of the magnet:
32mm, length of the junction cable: 400mm,
weight without case: appr. 900g
This instrument especially proved for effective in
testing small parts and welds.
We certify that the permanent magnet has lifting
force ≥265N (27kg) with a spacing between legs
(minimum lifting force according ASTM E 709 is
225N (22,5kg) with a 100 to 150 spacing between
legs.The permanent magnet was created and testing
according to ASTM E 709 + ASTM E 1444.
11