Controls

Comfort Controls & Audio Systems
AMIFM Stereo with
Cassette Player and
Graphic Equalizer (CONT.)
To Play a Cassette Tape:
Press “PWR” to turn the radio on. The
radio will play until a cassette is pushed
into the cassette entry door (the tape side
goes in first). Do not use tapes that are
longer than 90 minutes (45 minutes on
each side).
This system has automatic Dolby B NR’
to reduce background noise on Dolby
encoded tapes. Dolby@ Noise Reduction
is manufactured under license from Dolby
Laboratories Licensing Corporation.
Dolby@ and the symbol 00 are
trademarks of Dolby Laboratories
Licensing Corporation.
PROG (Program): Press to change the
side of tape being played. When the end
of a tape is reached, the other side will
then play.
Cr02: This button sets tape bias. When
playing high bias chrome or metal tapes,
press the button to turn the Cr02 display
on. When playing standard tapes, press
again to turn the display off.
REV (Reverse): Press to reverse the tape
rapidly; press again to play the tape. (The
radio plays while a tape is rewinding.)
FWD (Fast Forward): Press to advance
[he tape rapidly; press again to play. (The
radio plays while the tape is advancing.)
PREV (Previous): Press “PREV” to
repeat a passage. The tape will back up
and stop at the first four-second quiet spot
in the tape, or when you press “PREV”
sgain or “PROG”.
NEXT Press to go to the next selection
on the tape. The tape will stop at the first
four-second quiet spot in the tape, or
when you press “NEXT” again or
”PROG”.
SToPL (StopoPlay): Press to switch from
the tape to the radio. Press again to
resume playing the tape.
EJECT Press to eject the cassette tape
(the radio will then play).
. . 138