Controls

Seats & Restraint Systems
To Use the Built-in Child
7estraint (CONT.)
E. Separate
the halves of the shoulder
harness clip.
i. Place the child in the child restraint
and put a shoulder harness strap over
each shoulder. Insert both seat belt
latch plates into the buckle and pull ul
on them to make sure they are firmly
latched.
Be sure that the seat buckle is free of
foreign objects that may prevent you
from properly latching the latch plates
If an object is in the opening, see your
Pontiac dealer for service before using
the child restraint.
6 Fasten the two halves of the shoulder
harness clip together and put it two to
three inches (5-8 cm) below the
child’s chin. The purpose of the clip is
to keep the shoulder harness straps
positioned correctly on the shoulders.
... 40