Controls

Disabling the Anti-Theft System:
1. Press the “1” and “4” buttons together
for five seconds with ignition on and
radio power off. The display will
show “SEC”, indicating the unit is in
the secure mode. (If “- - -” appears on
the display, the anti-theft system has
already been disabled.)
2. Press the “SET” button. The display
will show “000”.
3. Enter the first three digits of the code
following steps 6 and 7 of the
preceding paragraphs. The display
will show the numbers as entered.
4. Press the lower (“BAND”) knob. The
radio will display “000”
5. Enter the second three digits of the
code. The display will show the
numbers as entered.
6. Press the lower (“BAND”) knob. If
the display shows “- - -” then the
time, the disabling sequence was
successful (the numbers matched the
user-selected code or the factory
back-up code) and the unit is in the
“UNSECURED” mode. If the display
shows “SEC”, the disabling sequence
was unsuccessful and the numbers did
not match either of the codes and the
unit will remain in the “SECURED”
mode.
Steering Wheel Touch
Controls (OPTION)
Some audio system functions can be
operated with these controls.
AM/FM: Press to select either the AM or
FMl and FM2 radio bands. The band you
select will be displayed on the digital
screen. The frequency of the station will
be displayed, and if the station is in
stereo, the stereo indicator will also be
displayed.
143.. .