Controls

~~
Features & Controls
Power Sliding Door (CONE)
The sliding door must be unlocked for the
power sliding door to operate. The key
does not have to be in the ignition. To
help avoid accidental operation of the
sliding door, disable the power sliding
door by placing the power sliding door
enable switch in the “OFF” position.
The power sliding door will only open if
the transaxle is in “P” (Park). The
transaxle does not have to be in “P’
(Park) to close the door. If the enable
switch is “ON” and the power sliding
door is open or in the process of closing
when you shift out of “P” (Park), a buzzer
will sound and the “SLIDING DOOR”
light on your instrument panel will flash
(see “Sliding Door Ajar Warning Light”
in the Index). This is a warning that the
sliding door is not completely closed.
-
I f anything obstructs the sliding door
V vhile it is closing, the door will
a utomatically reverse to the open
I: losition, provided it meets sufficient
r esistance. Resistance must be as strong
a .s the force of the closing door, or
S tronger. The force of the closing door
i: ncreases significantly as the door
a ,pproaches the latch position.
f
... 64