Controls

~
~ THIS
TIRESIZE
Service & Appearance Care
I ~~
MFD BY GENERALMOTORSCORPM1Y3
CAWR FRT OAWR RR
LB/KC
,
VEHICLE CONFORMS TO ALL APPLICABLE US. FEDERAL
MOTOR VEHICLE SAFETY STANDARDS IN EFFECT ON THE DATE
OF MANUFACTURE SHOWN ABOVE.
SERlAL
NUMBER M.P.V.
MODEL
SPEED
MPBY
RTC RIM PSVI(PA (COLD1
SPA
SEEOWNERS MANUAL FOR ADDITIONAL INFORMATION
Taillight Bulb
Replacement (CONT.)
3. Replace the entire taillight housing
and screws.
3. Attach the spring clips to the taillight
housing and secure them.
I 0.Close the rear side windows and
liftgate.
11. Test the bulbs by using your turn
signals and taillights.
s .220
Windshield Wiper Blade
Replacement
Replacement blades for your vehicle are
24 inches in length. They come in
different types and are removed in
different ways. Here's-how to remove the
type with a release clip:
1.
2.
3.
Pull the windshield wiper arm away
from the windshield.
Lift the release clip with a screwdriver
and pull the blade assembly off the
wiper arm.
Push the new wiper blade securely on
the wiper arm.
Loading Your Vehicle
'he CertificationRire label is found on
he rear edge of the driver's door. The
abel shows the size of your original tires
.nd the inflation pressures needed to
bbtain the gross weight capacity of your
rehicle. This is called the GVWR (Gross
Jehicle Weight Rating). The GVWR
ncludes the weight of the vehicle, all
mupants, fuel and cargo.
The Certificationnire label also tells you
he maximum weights for the front and
'ear axles, called Gross Axle .Weight
cating (GAWR). To find out the actual
oads on your front and rear axles, you
leed to go to a weigh station and weigh
lour vehicle. Your dealer can help you