Line 6 TonePort UX8 GearBox 3.5 User Manual - MIDI Manuals

Line 6 GearBox 3.5 – Driver Panel & Recording
Mac OS X® Audio-MIDI Settings Dialog (TonePort UX8 Only)
5a
5b
5c
5e
5d
5f
5a – System Settings:
• The Default Input and Default Output options allow you to choose the sound card you want
your audio applications to use by default. If you want this to be your Line 6 device, select your
UX8 here.
• The System Output option allows you to choose which sound card the Mac System Settings are
played through. You may NOT want to choose this to be your Line 6 device, since it can be rather
annoying to hear those dings, beeps or frogs croaking at blaring volumes in your headphones
or monitors when working in your audio application! Even better, you can turn these system
settings off completely in the System Preferences > Sounds dialog.
5b – Properties For: Choose your TonePort UX8 here to allow the Audio Input and Audio Output
options display its settings.
5c – Audio Input:
• In the top selector, you will be able to choose your Record Send for the TonePort UX8 to
configure its Format options below.
• The Format selectors show you the Sample Rate* and Bit Depth that the Line 6 device will is
operating at for recording. The Bit Depth is fixed at 24 bit.
3•15