High frequency spindles for automatic tool change GMN - Industrial ...
High frequency spindles for automatic tool change GMN - Industrial ...
High frequency spindles for automatic tool change GMN - Industrial ...
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Индастриал Технолоджис www.ind-techno.com.ua +38 044 498 21 94<br />
<strong>High</strong> <strong>frequency</strong> spindle <strong>for</strong> <strong>automatic</strong> <strong>tool</strong> <strong>change</strong><br />
HCS 120 - 60000/10,5<br />
100<br />
Power<br />
P [kW]<br />
Torque<br />
M [Nm]<br />
43,4<br />
3<br />
57,4<br />
Locating length 215<br />
377,5<br />
14<br />
P S6-40%<br />
12<br />
P S6-60%<br />
10<br />
P S1<br />
8<br />
6<br />
4<br />
2<br />
0<br />
0 10000 20000 30000 40000 50000 60000<br />
Speed n [rpm]<br />
3<br />
2,5<br />
M S6-40%<br />
M S6-60%<br />
2<br />
M S1<br />
1,5<br />
1<br />
0,5<br />
120 h5<br />
52<br />
Asynchronous motor<br />
Power P (S1) ....................................... 10.5 kW at 51,000 rpm<br />
Torque M (S1) .................................... 2 Nm<br />
Speed n max ........................................ 60,000 rpm<br />
Drive ..................................................... closed-loop<br />
Hybrid ball bearings<br />
Bore diameter<br />
of front bearings .............................. 30 mm<br />
Lubrication ......................................... Oil/air<br />
Tool interface<br />
Interface .............................................. HSK-E 25<br />
Monitoring<br />
"clamped", "unclamped",<br />
"clamped without <strong>tool</strong>" ................. Analog sensor<br />
Taper cleaning .................................. Air<br />
Static <strong>tool</strong> pull-in <strong>for</strong>ce .................. 2.8 kN<br />
Seal .......................................................... Air purge<br />
Coolant<br />
through shaft .................................... 80 bar<br />
Rigidity<br />
Radial.................................................... 110 N/µm<br />
Axial ...................................................... 70 N/µm<br />
<strong>Industrial</strong> Technologies<br />
0<br />
0 10000 20000 30000 40000 50000 60000<br />
Speed n [rpm]<br />
Also available with permanent grease lubrication.<br />
This lubrication leads to speed reduction.<br />
20
Change language