High frequency spindles for automatic tool change GMN - Industrial ...
High frequency spindles for automatic tool change GMN - Industrial ...
High frequency spindles for automatic tool change GMN - Industrial ...
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Индастриал Технолоджис www.ind-techno.com.ua +38 044 498 21 94<br />
0,1<br />
<strong>High</strong> <strong>frequency</strong> spindle <strong>for</strong> <strong>automatic</strong> <strong>tool</strong> <strong>change</strong><br />
HCS 300 - 14000/45<br />
Power<br />
P [kW]<br />
Torque<br />
M [Nm]<br />
60<br />
50<br />
40<br />
30<br />
20<br />
10<br />
190<br />
135<br />
105<br />
P S1<br />
25 32<br />
P S6-40%<br />
P S6-60%<br />
20°<br />
235<br />
230<br />
380<br />
100 50<br />
5 x 45°<br />
303<br />
0<br />
0 3500 7000 10500 14000<br />
Speed n [rpm]<br />
400<br />
350<br />
300<br />
250<br />
200<br />
150<br />
100<br />
50<br />
M S6-40%<br />
M S6-60%<br />
M S1<br />
0<br />
0 3500 7000 10500 14000<br />
Speed n [rpm]<br />
Locating length 373<br />
-0,03<br />
-0,05<br />
300<br />
299,5<br />
154<br />
949,2<br />
2<br />
Asynchronous motor<br />
Power P (S1) ........................................... 45 kW at 1,560 rpm<br />
Torque M (S1) ........................................ 275 Nm<br />
Speed n max ............................................ 14,000 rpm<br />
Drive ......................................................... closed-loop<br />
Hybrid ball bearings<br />
Bore diameter<br />
of front bearings .................................. 110 mm<br />
Lubrication ............................................. Oil/air<br />
Tool interface<br />
Interface .................................................. HSK-A 100<br />
Monitoring<br />
"clamped", "unclamped",<br />
"clamped without <strong>tool</strong>" ..................... Analog sensor<br />
Taper cleaning ...................................... Air<br />
Static <strong>tool</strong> pull-in <strong>for</strong>ce ...................... 45 kN<br />
Seal .............................................................. Air purge<br />
Coolant<br />
through shaft ........................................ 80 bar<br />
through spindle housing .................. 10 bar<br />
Shaft movement<br />
Compensating - Axial......................... Temperature sensor<br />
Rigidity<br />
Radial....................................................... 550 N/µm<br />
Axial.......................................................... 540 N/µm<br />
Option<br />
Shaft movement sensor<br />
Vibration sensor<br />
1034,1<br />
<strong>Industrial</strong> Technologies<br />
Also available with permanent grease lubrication.<br />
This lubrication leads to speed reduction.<br />
44