High frequency spindles for automatic tool change GMN - Industrial ...
High frequency spindles for automatic tool change GMN - Industrial ...
High frequency spindles for automatic tool change GMN - Industrial ...
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Индастриал Технолоджис www.ind-techno.com.ua +38 044 498 21 94<br />
<strong>High</strong> <strong>frequency</strong> spindle <strong>for</strong> <strong>automatic</strong> <strong>tool</strong> <strong>change</strong><br />
HCS 230g - 16000/40<br />
146<br />
120<br />
89<br />
Power<br />
P [kW]<br />
Torque<br />
M [Nm]<br />
68,5<br />
5,5 9<br />
23,5<br />
60<br />
50<br />
40<br />
30<br />
20<br />
10<br />
18°<br />
5°<br />
170<br />
87<br />
99<br />
113<br />
229,5<br />
280<br />
143 0,1<br />
0<br />
0 4000 8000 12000 16000<br />
120<br />
100<br />
80<br />
60<br />
40<br />
20<br />
M S6-40%<br />
M S6-60%<br />
M S1<br />
Speed n [rpm]<br />
0<br />
0 4000 8000 12000 16000<br />
Speed n [rpm]<br />
Locating length 274<br />
230 -0,03<br />
-0,05<br />
P S6-40%<br />
P S6-60%<br />
P S1<br />
417<br />
228<br />
537<br />
66<br />
128<br />
620,1<br />
693,6<br />
Asynchronous motor<br />
Power P (S1) ........................................... 40 kW at 4,500 rpm<br />
Torque M (S1) ........................................ 85 Nm<br />
Speed n max ............................................ 16,000 rpm<br />
Drive ......................................................... closed-loop<br />
Hybrid ball bearings<br />
Bore diameter<br />
of front bearings .................................. 70 mm<br />
Lubrication ............................................. Oil/air<br />
Tool interface<br />
Interface .................................................. HSK-A 63<br />
Monitoring<br />
"clamped", "unclamped",<br />
"clamped without <strong>tool</strong>"......................Analog sensor<br />
Taper cleaning ...................................... Air<br />
Static <strong>tool</strong> pull-in <strong>for</strong>ce ...................... 20 kN<br />
Seal .............................................................. Air purge<br />
Coolant<br />
through shaft ........................................ 80 bar<br />
through spindle housing .................. 10 bar<br />
Shaft movement<br />
Compensating - Axial ......................... Temperature sensor<br />
Rigidity<br />
Radial........................................................ 647 N/µm<br />
Axial .......................................................... 282 N/µm<br />
Option<br />
Shaft displacement sensor<br />
Vibration sensor<br />
<strong>Industrial</strong> Technologies<br />
Also available <strong>for</strong> oil/air lubrication.<br />
This lubrication possibly leads to increase of speed.<br />
37
Change language