High frequency spindles for automatic tool change GMN - Industrial ...
High frequency spindles for automatic tool change GMN - Industrial ...
High frequency spindles for automatic tool change GMN - Industrial ...
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Индастриал Технолоджис www.ind-techno.com.ua +38 044 498 21 94<br />
<strong>High</strong> <strong>frequency</strong> spindle <strong>for</strong> <strong>automatic</strong> <strong>tool</strong> <strong>change</strong><br />
HCS 125 - 42000/15<br />
3 5,5<br />
23,5<br />
100 -0,2<br />
90<br />
33 53 125 h5<br />
119,9-0,2<br />
51,5<br />
85<br />
95<br />
261<br />
303<br />
402<br />
446<br />
490<br />
Power<br />
P [kW]<br />
Torque<br />
M [Nm]<br />
20<br />
15<br />
10<br />
5<br />
M S1<br />
8,3 0,1<br />
M S6-40%<br />
M S6-60%<br />
160<br />
51<br />
10<br />
63<br />
140<br />
51<br />
Locating length<br />
124 -0,2<br />
30°<br />
P S6-40%<br />
P S6-60%<br />
0<br />
0 14000 28000 42000<br />
Speed n [rpm]<br />
10<br />
8<br />
6<br />
4<br />
2<br />
P S1<br />
124 -0,2<br />
99<br />
Synchronous motor<br />
Power P (S1).......................................... 15 kW at 24,000 rpm<br />
Torque M (S1) ....................................... 6 Nm<br />
Speed n max ........................................... 42,000 rpm<br />
Drive ........................................................ closed-loop<br />
Hybrid ball bearings<br />
Bore diameter<br />
of front bearings ................................. 35 mm<br />
Lubrication ........................................... Oil/air<br />
Tool interface<br />
Interface................................................. HSK-E 32<br />
Monitoring<br />
"clamped", "unclamped",<br />
"clamped without <strong>tool</strong>".................... Analog sensor<br />
Taper cleaning ..................................... Air<br />
Static <strong>tool</strong> pull-in <strong>for</strong>ce ..................... 5 kN<br />
Seal ............................................................. Air purge<br />
Shaft movement<br />
Measuring - Axial................................ Displacement sensor<br />
Rigidity<br />
Radial ...................................................... 146 N/µm<br />
Axial......................................................... 84 N/µm<br />
71<br />
32<br />
2<br />
<strong>Industrial</strong> Technologies<br />
0<br />
0 14000 28000 42000<br />
Speed n [rpm]<br />
Also available with permanent grease lubrication.<br />
This lubrication leads to speed reduction.<br />
23
Change language