Leica EM HPM100

More documents

Recommendations

Info

Fasten the worktop to the loading station of the Leica EM HPM100 with the supplied bolts. The long bolt attaches through the metal support. Tighten all 7 bolts. Page 17 Leica EM HPM100 Operating Manual Version 12/10
Undo the loading mechanism from the lever axis by removing the two (2mm hex) bolts. Loading mechanism Lever axis Place the loading mechanism into the loading station. Page 18 Leica EM HPM100 Operating Manual Version 12/10
Page 1 and 2: Leica EM HPM100 Operating Manual Ve
Page 3 and 4: Leica EM HPM100 Operating Manual Le
Page 5 and 6: Tabel of contents 1. Introduction .
Page 7 and 8: 1. Introduction In order to ensure
Page 9 and 10: 3. Product description 3.1 Field of
Page 11 and 12: 3.5.4 Safety measures when working
Page 13 and 14: • Wear a face shield or safety gl
Page 15 and 16: 4. Preparing the system for use 4.1
Page 17 and 18: Remove the screws and remove the wo
Page 19: Remove the plastic packaging from t
Page 23 and 24: Unpack the box containing the stere
Page 25 and 26: Remove the eye piece caps. Attach t
Page 27 and 28: Unscrew the back panel of the Leica
Page 29 and 30: 5. Operating instructions 5.1 Intro
Page 31 and 32: If a USB stick is connected to the
Page 33 and 34: Open the front safety cover and pro
Page 35 and 36: Once the operating pressure has bee
Page 37 and 38: The display on the main screen show
Page 39 and 40: Insert the upper and lower cylinder
Page 41 and 42: The loading mechanism is now closed
Page 43 and 44: 5.3 Actions following the freezing
Page 45 and 46: 5.3.3 Separating and sorting specim
Page 47 and 48: Push the lever forward. The specime
Page 49 and 50: 5.3.5.2 Bake out of the system Once
Page 51 and 52: 5.4 Changing settings on the main s
Page 53 and 54: 5.4.3 Changing the temperature of t
Page 55 and 56: The machine is ready to freeze with
Page 57 and 58: 7. Messages during operation 7.1 St
Page 59 and 60: Numbers show dimensions in millimet
Page 61 and 62: Minutes LMS Holdings GmbH Tel. +49(

Leica EM HPM100

Create successful ePaper yourself

Delete template?

Save as template?