Leica EM HPM100

More documents

Recommendations

Info

The touch screen shows a “wait for air pressure” message until the compressor has built up the operating pressure. Page 31 Leica EM HPM100 Operating Manual Version 12/10
Once the operating pressure has been reached the main touch screen will appear. Settings can be made with the main touch screen. See Section 5.4.7. Buttons always have a light background and open a new window when pressed. 2 3 1 4 5 6 7 8 9 10 1 status display(During the cooling process the main screen shows "wait for cool down“) 2 alcohol On/Off display 3 cycle counter 4 storage Dewar fill level display 5 actual temperature in process chamber 6 button for setpoint temperature in process chamber 7 directory selection button 8 file name display for saving the process data 9 service button (access for service technicians only) 10 system button (includes draining and bake-out) Page 32 Leica EM HPM100 Operating Manual Version 12/10
Page 1 and 2: Leica EM HPM100 Operating Manual Ve
Page 3 and 4: Leica EM HPM100 Operating Manual Le
Page 5 and 6: Tabel of contents 1. Introduction .
Page 7 and 8: 1. Introduction In order to ensure
Page 9 and 10: 3. Product description 3.1 Field of
Page 11 and 12: 3.5.4 Safety measures when working
Page 13 and 14: • Wear a face shield or safety gl
Page 15 and 16: 4. Preparing the system for use 4.1
Page 17 and 18: Remove the screws and remove the wo
Page 19 and 20: Remove the plastic packaging from t
Page 21 and 22: Undo the loading mechanism from the
Page 23 and 24: Unpack the box containing the stere
Page 25 and 26: Remove the eye piece caps. Attach t
Page 27 and 28: Unscrew the back panel of the Leica
Page 29 and 30: 5. Operating instructions 5.1 Intro
Page 31 and 32: If a USB stick is connected to the
Page 33: Open the front safety cover and pro
Page 37 and 38: The display on the main screen show
Page 39 and 40: Insert the upper and lower cylinder
Page 41 and 42: The loading mechanism is now closed
Page 43 and 44: 5.3 Actions following the freezing
Page 45 and 46: 5.3.3 Separating and sorting specim
Page 47 and 48: Push the lever forward. The specime
Page 49 and 50: 5.3.5.2 Bake out of the system Once
Page 51 and 52: 5.4 Changing settings on the main s
Page 53 and 54: 5.4.3 Changing the temperature of t
Page 55 and 56: The machine is ready to freeze with
Page 57 and 58: 7. Messages during operation 7.1 St
Page 59 and 60: Numbers show dimensions in millimet
Page 61 and 62: Minutes LMS Holdings GmbH Tel. +49(

Leica EM HPM100

Create successful ePaper yourself

Delete template?

Save as template?