Swing Gates
Swing Gates
Swing Gates
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
Guide to the<br />
PRODUCT<br />
Control units<br />
GATE 1<br />
ROLL<br />
Condominium use<br />
for 1 sliding gate,<br />
swing gate, barrier,<br />
sliding door<br />
pag.79<br />
GATE 2<br />
ROLL<br />
Condominium use<br />
for 2 sliding gates,<br />
swing gates, barriers,<br />
sliding doors<br />
pag.79<br />
USER<br />
1 24V<br />
ROLL<br />
for 1 motor 24 V<br />
pag.80<br />
ELECTRONIC<br />
CONTROL UNITS<br />
USER<br />
2 24V<br />
ROLL<br />
for 2 24V motors<br />
pag.80<br />
NEW-<br />
SWING 2<br />
ROLL<br />
swing operators<br />
w/out limit switch<br />
residential use<br />
pag.79<br />
ROLLING<br />
Song<br />
for 1 rolling shutter<br />
pag.80<br />
MINI<br />
GATE<br />
1 24 V<br />
Corona<br />
for one garage<br />
door or overhead<br />
door<br />
pag.81<br />
70<br />
N.B: The control units GATE1 ROLL - GATE2 ROLL - NEW SWING 2-USER 1 24V- USER 2 24V ROLL are equipped with radio decoding and it is<br />
necessary to plug in the radio module RF Roll 433 (or RF Roll 868 MHz) to activate the Rolling Code receiving function.<br />
The radio decoding has two channels (pedestrian II° channel) with 800 users.<br />
For Fixed Code function just add the RF on GATE 1 - USER 1 24V - USER 2 24V and NEW SWING 2. On GATE 2 replace Micro with KIT RF +<br />
Micro € 33,00.
Change language