Swing Gates

Control units for one or two motors (gate series)
Description
- Management of one 230 Vac motor with or without limit switch
- Pedestrian opening
- Automatic logic (4 modalities), semiautomatic
- Slow down in opening and closing
- Motor couple adjustment
- Self-learning operating times
- Auto-test on photocells
- Auto-diagnostic
- Encoder management (also Safety Gate for swing gates)
- Diagnostic Leds on all outputs/inputs
- Extractable connectors
- Integrated radio decoding compatible with radio transmitters LADYBIRD,HEAD ROLL,
SMART DUAL (800 users)) series with optional RF radio frequency module
- Programming through palm
- Working time
- Pedestrian opening time
- SAFETY GATE (encoder) sensitivity
- N° cycles for assistance
- PUSH-OVER function administration
- AUX output administration
- Automatic closing with photocells crossing Administration
GATE 1 ROLL
Complete with IP55 box
BOX BL
GATE 2 ROLL
Description
- Management of two 230 Vac motors with or without limit switch
- Automatic logic (4 modalities), semiautomatic
- Slow down in opening and closing
- Motor torque adjustment
- Self-learning operating times
- Auto-test on photocells
- Auto-diagnostic
- Administration encoder (also Safety Gate for swing gates)
- Electric lock management
- Diagnostic Leds on all outputs/inputs
- Extractable connectors
- Integrated radio decoding compatible with radio transmitter
SMARTHEAD, LADYBIRD
(800 users) series with optional RF radio frequency module (RF)
- Programming through palm
- Working time
- Pedestrian opening time
- SAFETY GATE (encoder) sensitivity
- N° cycles for assistance
- Limit switch exclusion (to avoid bridges)
- Electric lock activation in closing
- PUSH-OVER function administration
- AUX output administration
- Automatic closing with photocells crossing administration
- Courtesy light timing mode
- Photocells in opening and closing
78
245
BOX BLD
Complete with IP55 box
325
66.5
75
18
3
BOX BLD
BOX BL
238
50
Electronic units for swing gates
(for all swing gates without limit switches) NEW SWING 2
Description
- Management of two 230 Vac motors without limit switch
- Automatic, semiautomatic, automatic, semiautomatic of security
- Slow down in opening and closing
- Motor couple adjustment
- Self-learning working times
- Auto-test on photocell
- Auto-diagnostic
- Automatic closing with photocell crossing administration
- Courtesy light
- Electric lock management
- Diagnostic Leds on all outputs/inputs
- Extractable connectors
- Integrated radio decoding compatible (800 users)
series with optional radio frequency module
- Pedestrian opening
- Max. transformer output capacity 200mA
- Programming trough PALM:
- Working time
- Leaf slow down time
- N° cycles for assistance
- PUSH-OVER function administration
- Photocells in opening administration
AMPEROMETRIC
BOX BL
* FOR SW UPDATING
Complete with IP55 box
CODE DESCRIPTION
23001120 GATE 1 ROLL with box
23001123 GATE 1 ROLL THEEPH. with box
23001129 GATE 2 ROLL with box
23021093 NEW SWING 2 ROLL with box
23105350 BL small box
23105355 BLD big box
N.B: The control units GATE1 ROLL - GATE2 ROLL - NEW SWING 2-USER 1 24V- USER
2 24V ROLL are equipped with radio decoding and it is necessary to plug in the
radio module RF Roll 433 (or RF Roll 868 MHz) to activate the Rolling Code receiving
function.
The radio decoding has two channels (pedestrian II° channel) with 800 users.
For Fixed Code function just add the RF on GATE 1 - USER 1 24V - USER 2 24V and NEW
SWING 2. On GATE 2 replace Micro with KIT RF + Micro.
23120424
23106230
KIT RF + Micro GATE2
Micro Gate 1 dead man
function
79