308546S Series 700 Hose Reels, Instructions-Parts ... - Graco Inc.
308546S Series 700 Hose Reels, Instructions-Parts ... - Graco Inc.
308546S Series 700 Hose Reels, Instructions-Parts ... - Graco Inc.
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Symbols<br />
Warning Symbol<br />
WARNING<br />
This symbol alerts you to the possibility of serious<br />
injury or death if you do not follow the instructions.<br />
Caution Symbol<br />
CAUTION<br />
This symbol alerts you to the possibility of damage to<br />
or destruction of equipment if you do not follow the<br />
instructions.<br />
WARNING<br />
FIRE, EXPLOSION, and INJECTION<br />
HAZARD<br />
This hose reel is designed to dispense<br />
lube products, air, water, transmission<br />
fluid, antifreeze, gasoline, and diesel<br />
fuel only. Any other use can cause<br />
unsafe operating conditions and result in<br />
component rupture, fire, or explosion,<br />
which could cause serious injury, including<br />
fluid injection.<br />
EQUIPMENT MISUSE HAZARD<br />
WARNING<br />
Equipment misuse can cause the equipment to rupture or malfunction and result in serious injury.<br />
INSTRUCTIONS<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
This equipment is for professional use only.<br />
Read all instruction manuals, tags, and labels before operating the equipment.<br />
Use the equipment only for its intended purpose. If you are not sure, call your <strong>Graco</strong> distributor.<br />
Do not alter or modify this equipment. Use only genuine <strong>Graco</strong> parts and accessories. Modifying<br />
parts can cause a malfunction and result in serious bodily injury.<br />
Check equipment daily. Repair or replace worn or damaged parts immediately.<br />
Do not exceed the maximum working pressure of the lowest rated system component. Refer to<br />
the Technical Data on page 21 for the maximum working pressure of this equipment.<br />
Use fluids and solvents that are compatible with the equipment wetted parts. Refer to the Technical<br />
Data section of all equipment manuals. Read the fluid and solvent manufacturer’s warnings.<br />
Do not use hoses to pull equipment.<br />
Route hoses away from traffic areas, sharp edges, moving parts, and hot surfaces. Do not<br />
expose hoses to temperatures above 82C (180F) or below –40C (–40F).<br />
Do not lift pressurized equipment.<br />
Comply with all applicable local, state, and national fire, electrical, and safety regulations.<br />
If you are adding a service hose and dispensing valve to a bare hose reel, be sure you know the<br />
maximum working pressure of all the components.<br />
4 308546