Kodak Easyshare CX7430 zoom digital camera - Foto Source ...

Problem Cause Solution
Picture is too
light.
Picture is not
clear.
The subject was too
close for flash.
The light sensor is
covered.
Troubleshooting
Move so there is at least 2 ft
(0.6 m) between camera and subject.
Hold the camera so your hands or other
objects do not cover the light sensor (page i).
Too much light. Decrease Exposure Compensation
(page 18).
Auto exposure was
not achieved.
To take the best possible pictures, press the
Shutter button halfway and hold. When
the ready light glows green, press the
Shutter button the rest of the way down
to take the picture.
The lens is dirty. Clean the lens (page 51).
Subject too close
when taking picture.
Subject or the camera
moved while the
picture was taken.
Auto-focus was not
achieved.
Camera is in Close-up
mode.
Move so there is at least 23.6 in. (60 cm)
between the camera and the subject, or at
least 5.1 in. (13 cm) at Wide in Close-up
mode.
Place the camera on a flat, steady surface or
use a tripod.
To take the best possible pictures, press the
Shutter button halfway and hold. When
the ready light glows green, press the
Shutter button the rest of the way down
to take the picture. (If the orange light
blinks, release the Shutter button and
recompose picture.)
Use Close-up mode when subject is 5.1-27.6
in. (13-70 cm) from the lens in Wide Angle;
8.7-27.6 in. (22-70 cm) in Telephoto.
42