Turinys - Standartizacijos departamentas prie AM

2009 Nr. 8 LIETUVOS STANDARTIZACIJOS DEPARTAMENTO BIULETENIS
CEN/TC 98 EN 1756-2:2004+A1:2009
Tail lifts - Platform lifts for mounting on wheeled vehicles
- Safety requirements - Part 2: Tail lifts for passengers
CEN/TC 98 EN 14010:2003+A1:2009
Safety of machinery - Equipment for power driven
parking of motor vehicles - Safety and EMC
requirements for design, manufacturing, erection and
commissioning stages
CEN/TC 102 EN 14180:2003+A2:2009
Sterilizers for medical purposes - Low temperature
steam and formaldehyde sterilizers - Requirements
and testing
CEN/TC 104 EN 480-10:2009
Admixtures for concrete, mortar and grout - Test
methods - Part 10: Determination of water soluble
chloride content
CEN/TC 121 EN ISO 2503:2009
Gas welding equipment - Pressure regulators and
pressure regulators with flow-metering devices for gas
cylinders used in welding, cutting and allied processes
up to 300 bar (30 MPa) (ISO 2503:2009)
CEN/TC 127 EN 15254-2:2009
Extended application of results from fire resistance
tests - Non-loadbearing walls - Part 2: Masonry and
Gypsum Blocks
CEN/TC 139 EN 13523-27:2009
Coil coated metals - Test methods - Part 27: Resistance
to humid poultice (Cataplasm test)
CEN/TC 144 EN 707:1999+A1:2009
Agricultural machinery - Slurry tankers - Safety
CEN/TC 144 EN 13684:2004+A2:2009
Garden equipment - Pedestrian controlled lawn
aerators and scarifiers - Safety
CEN/TC 144 EN ISO 10517:2009
Powered hand-held hedge trimmers - Safety
(ISO 10517:2009)
CEN/TC 151 EN 13042-3:2007+A1:2009
Machines and plants for the manufacture, treatment
and processing of hollow glass - Safety requirements
- Part 3: IS machines
CEN/TC 154 EN 933-9:2009
Tests for geometrical properties of aggregates -
Part 9: Assessment of fines - Methylene blue test
CEN/TC 154 EN 933-10:2009
Tests for geometrical properties of aggregates -
Part 10: Assessment of fines - Grading of filler
aggregates (air jet sieving)
CEN/TC 154 EN 1097-8:2009
Tests for mechanical and physical properties of
aggregates - Part 8: Determination of the polished
stone value
CEN/TC 184 EN 623-5:2009
Advanced technical ceramics - Monolithic ceramics -
General and textural properties - Part 5: Determination
of phase volume fraction by evaluation of micrographs
CEN/TC 184 EN 820-4:2009
Advanced technical ceramics - Thermomechanical
properties of monolithic ceramics - Part 4:
Determination of flexural creep deformation at
elevated temperatures
CEN/TC 184 EN 820-5:2009
Advanced technical ceramics - Thermomechanical
properties of monolithic ceramics - Part 5:
Determination of elastic moduli at elevated
temperatures
CEN/TC 184 EN 1071-9:2009
Advanced technical ceramics - Methods of test for
ceramic coatings - Part 9: Determination of fracture
strain
22
CEN/TC 184 EN 1071-10:2009
Advanced technical ceramics - Methods of test for
ceramic coatings - Part 10: Determination of coating
thickness by cross sectioning
CEN/TC 184 EN 1006:2009
Advanced technical ceramics - Monolithic ceramics -
Guidance on the selection of test pieces for the
evaluation of properties
CEN/TC 191 EN 13565-2:2009/AC:2009
Fixed firefighting systems - Foam systems - Part 2:
Design, construction and maintenance
CEN/TC 205 EN 455-4:2009
Medical gloves for single use - Part 4: Requirements
and testing for shelf life determination
CEN/TC 205 EN 13795-1:2002+A1:2009
Surgical drapes, gowns and clean air suits, used as
medical devices, for patients, clinical staff and
equipment - Part 1: General requirements for
manufacturers, processors and products
CEN/TC 205 EN 13795-2:2004+A1:2009
Surgical drapes, gowns and clean air suits, used as
medical devices for patients, clinical staff and
equipment - Part 2: Test methods
CEN/TC 205 EN 13795-3:2006+A1:2009
Surgical drapes, gowns and clean air suits, used as
medical devices for patients, clinical staff and
equipment - Part 3: Performance requirements and
performance levels
CEN/TC 207 EN 12521:2009
Furniture - Strength, durability and safety -
Requirements for domestic tables
CEN/TC 211 EN ISO 3741:2009
Acoustics - Determination of sound power levels of
noise sources using sound pressure - Precision
methods for reverberation rooms (ISO 3741:1999,
including Cor 1:2001)
CEN/TC 211 EN ISO 3743-1:2009
Acoustics - Determination of sound power levels of
noise sources - Engineering methods for small,
movable sources in reverberant fields - Part 1:
Comparison method for hard-walled test rooms
(ISO 3743-1:1994)
CEN/TC 211 EN ISO 3743-2:2009
Acoustics - Determination of sound power levels of
noise sources using sound pressure - Engineering
methods for small, movable sources in reverberant
fields - Part 2: Methods for special reverberation test
rooms (ISO 3743-2:1994)
CEN/TC 211 EN ISO 3744:2009
Acoustics - Determination of sound power levels of
noise sources using sound pressure - Engineering
method in an essentially free field over a reflecting
plane (ISO 3744:1994)
CEN/TC 211 EN ISO 3745:2009
Acoustics - Determination of sound power levels of
noise sources using sound pressure - Precision
methods for anechoic and semi-anechoic rooms
(ISO 3745:2003)
CEN/TC 211 EN ISO 3746:2009
Acoustics - Determination of sound power levels of
noise sources using sound pressure - Survey method
using an enveloping measurement surface over a
reflecting plane (ISO 3746:1995, including
Cor 1:1995)
CEN/TC 214 EN ISO 11111-1:2009
Textile machinery - Safety requirements - Part 1:
Common requirements (ISO 11111-1:2009)
CEN/TC 214 EN ISO 11111-2:2005/A1:2009
Textile machinery - Safety requirements - Part 2:
Spinning preparatory and spinning machines -
Amendment 1 (ISO 11111-2:2005/Amd 1:2009)