FBM 2180 Installation Instruction - Emerson Process Management
FBM 2180 Installation Instruction - Emerson Process Management
FBM 2180 Installation Instruction - Emerson Process Management
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
Saab Rosemount TankRadar<br />
<strong>FBM</strong> <strong>2180</strong><br />
Chapter 3 Operation<br />
<strong>Installation</strong> <strong>Instruction</strong><br />
308019E, Edition 1<br />
May 2006<br />
3. Operation<br />
3.1 Front Panel<br />
The <strong>FBM</strong> <strong>2180</strong> front LEDs show information on power supply,<br />
communication status and communication interface.<br />
LEDs for external power<br />
and communication<br />
Gain<br />
switch<br />
Termination<br />
switch<br />
External power<br />
Receive<br />
RS232<br />
Transmit<br />
USB<br />
The Termination switch is used if there are extremely short cables between<br />
the transmitter and the modem.<br />
The Gain switch is set to Lo by default. This setting is sufficient in most<br />
cases. The Hi Gain setting may be used if cable dimensions are insufficient<br />
resulting in a heavily damped communication signal.<br />
3.2 Communicating with TankMaster<br />
TankMaster WinSetup allows you to setup the communication between a<br />
PC, Field Communication Unit (FCU) and field instruments in a Saab<br />
Rosemount system. For each communication port that is used on the PC a<br />
protocol channel has to be configured (see the TankMaster WinSetup User´s<br />
Guide for more information on communication protocol setup).<br />
6
Change language