D-Link DCS-2210 Full HD Cube IP Camera User Manual - Use-IP
D-Link DCS-2210 Full HD Cube IP Camera User Manual - Use-IP
D-Link DCS-2210 Full HD Cube IP Camera User Manual - Use-IP
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Configuration<br />
This wizard will guide you through a step-by-step process to configure your<br />
camera's motion detection functions.<br />
Click Next to continue.<br />
Motion Detection Setup Wizard<br />
Step 1<br />
This step will allow you to enable or disable motion detection, specify the<br />
detection sensitivity, and adjust the camera’s ability to detect movement.<br />
You may specify whether the camera should capture a snapshot or a video<br />
clip when motion is detected.<br />
Please see the Motion Detection section on page 27 for information about<br />
how to configure motion detection.<br />
Step 2<br />
This step allows you to enable motion detection based on a customized<br />
schedule. Specify the day and hours. You may also choose to always<br />
record motion.<br />
D-<strong>Link</strong> <strong>DCS</strong>-<strong>2210</strong>/2230 <strong><strong>Use</strong>r</strong> <strong>Manual</strong><br />
22
Change language