D-Link DCS-2210 Full HD Cube IP Camera User Manual - Use-IP

Configuration
Network Setup
Use this section to configure the network connections for your camera. All relevant information must be entered accurately. After
making any changes, click the Save Settings button to save your changes.
LAN Settings:
DHCP:
Static IP Address:
This section lets you configure settings for your local
area network.
Select this connection if you have a DHCP server
running on your network and would like your camera
to obtain an IP address automatically.
You may obtain a static or fixed IP address and
other network information from your network
administrator for your camera. A static IP address
may simplify access to your camera in the future.
IP Address:
Enter the fixed IP address in this field.
Subnet Mask:
Default Gateway:
Primary DNS:
Secondary DNS:
This number is used to determine if the destination
is in the same subnet. The default value is
255.255.255.0.
The gateway used to forward frames to destinations
in a different subnet. Invalid gateway settings may
cause the failure of transmissions to a different
subnet.
The primary domain name server translates names
to IP addresses.
The secondary DNS acts as a backup to the primary
DNS.
D-Link DCS-2210/2230 User Manual
24