D-Link DCS-2210 Full HD Cube IP Camera User Manual - Use-IP

More documents

Recommendations

Info

Configuration Image Setup In this section, you may configure the video image settings for your camera. A preview of the image will be shown in Live Video. Enable Privacy Mask: The Privacy Mask setting allows you to specify upto 3 rectangular areas on the camera's image to beblocked/excluded from recordings and snapshots. You may click and drag the mouse cursor over thecamera image to draw a mask area.Right clicking on the camera image brings up thefollowing menu options: Disable All: Disables all mask areas Enable All: Enables all mask areas Reset All: Clears all mask areas. Anti Flicker: Mirror: Flip: Power Line: White Balance: If the video flickers, try enabling this setting. This will mirror the image horizontally. This will flip the image vertically. When turning Flip on, you may want to consider turning Mirror on as well. Select the frequency used by your power lines to avoid interference or distortion. Use the dropdown box to change white balance settings to help balance colors for different environments. You can choose from Auto, Outdoor, Indoor, Fluorescent, and Push Hold. Exposure Mode: Changes the exposure mode. Use the dropdown box to set the camera for Indoor, Outdoor, or Night environments, or to Moving to capture moving objects. The Low_Noise option will focus on creating a high-quality picture without noise. You can also create 3 different custom exposure modes. The Max Gain setting will allow you to control the maximum amount of gain to apply to brighten the picture. Denoise: Brightness: This setting controls the amount of noise reduction that will be applied to the picture. Adjust this setting to compensate for backlit subjects. D-Link DCS-2210/2230 User Manual 30
Configuration Contrast: Saturation: Sharpness: Reset Default: Adjust this setting to alter the color intensity/strength. This setting controls the amount of coloration, from grayscale to fully saturated. Specify a value from 0 to 8 to specify how much sharpening to apply to the image. Click this button to reset the image to factory default settings. D-Link DCS-2210/2230 User Manual 31
Page 2 and 3: Product Overview...............
Page 4 and 5: Product Overview Package Contents
Page 6 and 7: Hardware Overview Rear Ethernet RJ4
Page 8 and 9: Hardware Overview Configuration wit
Page 10 and 11: Hardware Overview Click Finish to c
Page 12 and 13: Hardware Overview Select DHCP if yo
Page 14 and 15: Configuration Enter admin as the de
Page 16 and 17: Configuration Click Finish to compl
Page 18 and 19: Configuration Go To: (Preset List)
Page 20 and 21: Configuration Select Static IP if y
Page 22 and 23: Configuration This wizard will guid
Page 24 and 25: Configuration Network Setup Use thi
Page 26 and 27: Configuration Maximum Upload/Downlo
Page 28 and 29: Configuration Key: If you use WEP,
Page 32 and 33: Configuration Audio and Video You m
Page 34 and 35: Configuration Preset This screen al
Page 36 and 37: Configuration Motion Detection Enab
Page 38 and 39: Configuration Event Setup The Event
Page 40 and 41: Configuration Add Server You can co
Page 42 and 43: Configuration Video clip: Select th
Page 44 and 45: Configuration Time: Select Always o
Page 46 and 47: Configuration Size of each file for
Page 48 and 49: Configuration Advanced Digital Inpu
Page 50 and 51: Configuration HTTPS This page allow
Page 52 and 53: Configuration Maintenance Device Ma
Page 54 and 55: Configuration Firmware Upgrade The
Page 56 and 57: Configuration Logs This page displa
Page 58 and 59: Appendix DI/DO Input Specifications
Page 60 and 61: Appendix Technical Specifications S

D-Link DCS-2210 Full HD Cube IP Camera User Manual - Use-IP

Create successful ePaper yourself

Delete template?

Save as template?