D-Link DCS-2210 Full HD Cube IP Camera User Manual - Use-IP
D-Link DCS-2210 Full HD Cube IP Camera User Manual - Use-IP
D-Link DCS-2210 Full HD Cube IP Camera User Manual - Use-IP
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
Configuration<br />
ICR and IR<br />
Here you can configure the ICR and IR settings. An IR(Infrared) Cut-Removable(ICR) filter can be disengaged for increased sensitivity<br />
in low light environments.<br />
Automatic:<br />
The Day/Night mode is set automatically.<br />
Generally, the camera uses Day mode and<br />
switches to Night mode when needed.<br />
Day Mode:<br />
Night Mode:<br />
Day mode enables the IR Cut Filter.<br />
Night mode disables the IR Cut Filter.<br />
Schedule Mode:<br />
IR Light Control:<br />
Set up the Day/Night mode using a schedule.<br />
The camera will enter Day mode at the starting<br />
time and return to Night mode at the ending<br />
time.<br />
The camera can enable or disable the IR<br />
(infrared) light according to your preferences.<br />
This setting provides additional controls<br />
depending on your specific application.<br />
Off:<br />
On:<br />
Sync:<br />
The IR light will always be off.<br />
The IR light will always be on.<br />
The IR light will turn on when the ICR sensor is on.<br />
Schedule: The IR light will turn on or off according to the schedule that you specify below.<br />
D-<strong>Link</strong> <strong>DCS</strong>-<strong>2210</strong>/2230 <strong><strong>Use</strong>r</strong> <strong>Manual</strong><br />
49
Change language