Model No. SA-AKX95LMK - Panasonic

8.5.2. CD Mechanism Error Code Table (CD Mechanism Unit (BRS11C))
Error Code Diagnostic Contents Descriptionof error Automatic FL Display Remarks
CD H15 CD Open Abnormal During operation
POS_SW_R On fail to be
detected with 4 sec. Error
No. shall be clear by force
or during cold start.
CD H16 CD Closing Abnormal During operation
POS_SW_CEN On fail to
be detected with 4 sec.
Error No. shall be clear by
force or during cold start.
Press [ ] on main unit for
next error.
Press [ ] on main unit for
next error.
F26
Communication between
CD servo LSI and micro-p
abnormal.
During switch to CD function,
if SENSE = “L” within
failsafe time of 20ms.
Press [ ] on main unit for
next error.
8.6. Sales Demonstration Lock Function
8.6.1. Entering into sales Demo Mode
Here is the procedures to enter into Sales Demonstration Lock.
Step 1: Turn on the unit.
Step 2: Select to any mode function.
Step 3: Press [ OPEN/CLOSE] key then [ / ] key at the same time,press and hold both [ OPEN/CLOSE] and [ / ] keys for 5 sec.
Step 4: The display will show upon entering into this mode for 2 sec..
Note: [
OPEN/CLOSE] button is invalid and the main unit displays “LOCKED” while the lock function mode is entered.
8.6.2. Cancellation
Step 1: Turn on the unit.
Step 2: Select to any mode function.
Step 3: Press [ OPEN/CLOSE] key then [ / ] key at the same time,press and hold both [ OPEN/CLOSE] and [ / ] keys for 5 sec.
Step 4: The display will show upon entering into this mode for 2 sec..
24