Multi-Media Solutions Digital Signage Platform NDiS 167 ... - Nexcom

Chapter 1: Product Introduction
▪▪
USB 3.0
--
Supports USB wake up
--
USB 3.0 Port 1~2 + USB2.0 Port 1~2 on the rear panel
--
USB 3.0 Port 3~4 + USB2.0 Port 3~4 on the front panel
▪▪
GPIO
--
8 GPIO lines (GPI 0~3 and GPO 0~3); TTL Level (0/5V)
--
2x5 pin header, 2.54mm
▪▪
Others
--
Onboard buzzer
--
RTC reset: 1x3 pin header, 2.54mm
--
1x SIM Slot for 3G
Power Supply
▪▪
▪▪
Onboard DC to DC
--
Support power range design: +12V +/-10% DC input
--
4-pin Mini-DIN power jack
--
4-pin power connector input
--
Supports power on after failure
--
Supports soft off
--
Supports alarm wake up
--
Supports WOL
External adapter
--
+12V DC power adapter
RTC Battery
▪▪
On chip RTC with battery back up/ 1x external Li-ion battery
BIOS
▪▪
AMI system BIOS
▪▪
64Mbits SPI flash ROM
▪▪
Supports Intel® AMT 8.0
System Management
▪▪
▪▪
Monitoring
--
Super IO built-in function (IT8728F)
--
Monitoring of 5 voltages, 3 temperatures
4 voltages (for +3.3V, +5V, +12V, Vcore)
3 temperatures (CPU, two external temperature sensor)
2x FAN 3-pin connectors
Watchdog
--
Watchdog timeout is programmable by software from 1 second to
255 seconds and from 1 minute to 255 minutes
--
Tolerance 15% under room temperature 25°C
Operating System Support
▪▪
Microsoft
--
XP/ Win 7/ WES2009/ WES7
Main Board
Onboard I/O
▪▪
USB 2.0
--
1x JST for 4x reserved USB 2.0 ports
--
1x USB 2.0 Port to mini-PCIe1
--
1x USB 2.0 Port to mini-PCIe2
Copyright © 2012 NEXCOM International Co., Ltd. All Rights Reserved. 3 NDiS 167 User Manual