Multi-Media Solutions Digital Signage Platform NDiS 167 ... - Nexcom
Multi-Media Solutions Digital Signage Platform NDiS 167 ... - Nexcom
Multi-Media Solutions Digital Signage Platform NDiS 167 ... - Nexcom
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
Chapter 4: BIOS Setup<br />
Advanced<br />
The Advanced menu allows you to configure your system for basic operation.<br />
Some entries are defaults required by the system board, while others, if<br />
enabled, will improve the performance of your system or let you set some<br />
features according to your preference.<br />
Setting incorrect field values may cause the system to<br />
malfunction.<br />
RTC Wake Settings<br />
This section is used to enable or disable system to wake using RTC alarm.<br />
Main<br />
Aptio Setup Utility - Copyright (C) 2011 America Megatrends, Inc.<br />
Advanced Chipset Boot Security Save & Exit<br />
Wake system with Fixed Time<br />
[Disabled]<br />
Enable or disable System<br />
wake on alarm event. When<br />
enabled. System will wake on the<br />
hr::min::sec specified<br />
Main<br />
Aptio Setup Utility - Copyright (C) 2011 America Megatrends, Inc.<br />
Advanced Boot Security Save & Exit<br />
Save & Exit<br />
► RTC Wake Settings<br />
► ACPI Settings<br />
► CPU Configuration<br />
► SATA Configuration<br />
► Graphics Configuration<br />
► AMT Configuration<br />
► USB Configuration<br />
► Super IO Configuration<br />
► H/W Monitor<br />
► CPU PPM Configuration<br />
Enable system to wake using<br />
RTC alarm<br />
→←: Select Screen<br />
↑↓: Select Item<br />
Enter: Select<br />
+/-: Change Opt.<br />
F1: General Help<br />
F2: Previous Values<br />
F3: Optimized Defaults<br />
F4: Save & Exit<br />
ESC: Exit<br />
→←: Select Screen<br />
↑↓: Select Item<br />
Enter: Select<br />
+/-: Change Opt.<br />
F1: General Help<br />
F2: Previous Values<br />
F3: Optimized Defaults<br />
F4: Save & Exit<br />
ESC: Exit<br />
Version 2.14.1219. Copyright (C) 2011 American Megatrends, Inc.<br />
Wake system with Fixed Time<br />
This section is used to enable or disable system wake on alarm event. When<br />
enabled, system will wake on the HR:MIN:SEC specified.<br />
Version 2.14.1219. Copyright (C) 2011 American Megatrends, Inc.<br />
Copyright © 2012 NEXCOM International Co., Ltd. All Rights Reserved. 47 <strong>NDiS</strong> <strong>167</strong> User Manual