DTC P0107, P0108 5.19 - harley-davidson-sweden.se
DTC P0107, P0108 5.19 - harley-davidson-sweden.se
DTC P0107, P0108 5.19 - harley-davidson-sweden.se
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
HOME<br />
Test 5.23 (Part 3 of 3)<br />
FUEL INJECTORS: <strong>DTC</strong> P0261, P0262, P0263, P0264<br />
Continued from Test 5.23 (Part 1 of 3).<br />
Check for 12 volts at terminal 30 of the system relay.<br />
Correct voltage pre<strong>se</strong>nt<br />
YES<br />
NO<br />
3<br />
Check for 12 volts at terminal 86<br />
of the system relay.<br />
Correct voltage pre<strong>se</strong>nt<br />
Find and repair open on<br />
BE/GY wire between<br />
fu<strong>se</strong> and relay.<br />
YES<br />
NO<br />
Measure resistance between<br />
terminal 86 of the system<br />
relay and ECM terminal 13 on<br />
Breakout Box.<br />
Resistance less than 0.5 ohm<br />
See 5.11 NO ECM<br />
POWER.<br />
YES<br />
NO<br />
Measure resistance between<br />
terminal 85 of the system relay<br />
and ECM terminal 4 on Breakout<br />
Box.<br />
Resistance less than 0.5 ohm<br />
Find and repair<br />
open on W/BK<br />
wire.<br />
YES<br />
NO<br />
Install known good relay.<br />
Does fuel pump run for first<br />
2 <strong>se</strong>conds after key ON<br />
Find and repair<br />
open on GN/O<br />
wire.<br />
YES<br />
NO<br />
Clear codes using speedometer <strong>se</strong>lf diagnostics.<br />
See 5.6 SPEEDOMETER SELF DIAGNOSTICS.<br />
Confirm proper operation with no check engine<br />
lamp.<br />
Replace<br />
relay<br />
Reinstall original relay.<br />
Replace ECM. Reprogram<br />
and learn password.<br />
5-90 2004 Touring: Engine Management (EFI)
Change language